Bandit Alley

REGIONAL FORUMS => AUS/NZ => Topic started by: shoebandit75 on December 29, 2009, 06:34:08 PM

Title: serv manual for 91 250 HELP!
Post by: shoebandit75 on December 29, 2009, 06:34:08 PM

Just got my first bandit a 91 250 import, need a manual badly, got spongy front forks, soft rear shock, and need to get her on the road, anyone got any idea where to get one please? :beers:

Title: Re: serv manual for 91 250 HELP!
Post by: aussiebandit on December 29, 2009, 11:16:20 PM

Given that it's a grey import I doubt you'll get one in Oz. 

There's a 250/400 thread somewhere here, post your question there. Also there is thread somewhere with the manuals.

Title: Re: serv manual for 91 250 HELP!
Post by: stormi on December 30, 2009, 06:46:55 PM

Hi Shoebandit75,

Welcome to the board!

First off, this forum here is where you're likely going to want to spend a lot of your time:
http://forums.banditalley.net/index.php?board=20.0

Also, if you look at the top of the page, now that you're a member, there should be a downloads section that's available to you.  In there, you will find the manual you're looking for.

Title: Re: serv manual for 91 250 HELP!
Post by: shoebandit75 on January 01, 2010, 08:25:26 AM

thanks heaps for your help lads, great site.

Title: Re: serv manual for 91 250 HELP!
Post by: Benjamin on March 05, 2010, 01:06:57 AM

Same problems in OZ here mate. I have a 250, the front end is way soft. If you're like me and heavier than 80Kg I think that's just the problem, the springs were designed for a mythical 55Kg person. My rear shock is ok.

The 2000 model 250V was NOT a grey import apparently.