« previous next »
Pages: [1]

Author Topic: Front suspension swaps for 00 B12  (Read 4005 times)

Offline Inahurry

  • Board Regular!
  • **
  • Posts: 13
Front suspension swaps for 00 B12
« on: January 15, 2006, 10:03:23 AM »
Hey all you tight corner people out there.  This will be the 3rd set of seals i've blown through on the front.  Mechanic states due to pits/scars on the fork tubes that the seals will never hold long and that I need new tubes.  Anyone replaced these with inverted versions.  Would like to upgrade due to my weight (250+) and I love to corner at high speeds.  Also looking to jack up the rear due to my height.  Bike has 40K and has had Stage I mods completed.
Logged

Offline chevsuz12

  • Board Homesteader!
  • ***
  • Posts: 249
Front suspension swaps for 00 B12
« Reply #1 on: January 15, 2006, 11:46:28 AM »
If you want to jack up the rear, nothing beats installing a Hayabusa shock on the rear.  It takes a few mods, but well worth it.  I am about 250 lbs. as well.  I have yet to modify my front end though.
Logged
B12 Streetfighter!

Offline 2005B12S

  • Board Homesteader!
  • ***
  • Posts: 314
Front suspension swaps for 00 B12
« Reply #2 on: January 15, 2006, 04:04:32 PM »
Early to mid 90's GSXR 1100 (1992-95) will be your best bet, most of the later (2000 and up)stuff is too short and you will lose too much ground clearance.

It is a straight bolt on swap, but be prepared to possibly lose your steering lock and to have new fork stops fabricated.

Good Luck, Ed.
2005 GSF1200SZ
1983 GS750ED
Logged
2005 GSF1200SZ
1983 GS750ED
1992 900SS

"The quality of the kite matters little, sucess depends upon the man sitting in it" Manfred Von Richthofen

Offline Inahurry

  • Board Regular!
  • **
  • Posts: 13
Front suspension swaps for 00 B12
« Reply #3 on: January 15, 2006, 08:09:44 PM »
Thanks....at least I have a starting point to read up on...then I haVE to source them out...
Logged

Offline B12

  • New user!
  • *
  • Posts: 4
Stops
« Reply #4 on: March 31, 2006, 09:35:16 PM »
Why be prepared to lose the stops on the steering? Tank slappers? If so, isn't the shock too long?
Logged

Offline deepink

  • Board Homesteader!
  • ***
  • Posts: 166
    • http://www.oldredtruck.com
Front suspension swaps for 00 B12
« Reply #5 on: April 01, 2006, 12:34:52 AM »
No, the forks aren't too long.  the stock stops don't line up with the new triples.
Plus, most people keep the clip ons from the GSXR, and they are lower.
Logged
2001 Bandit 1200 - \\\\\\\\\\\\\\\"Revised\\\\\\\\\\\\\\\"

Offline Inahurry

  • Board Regular!
  • **
  • Posts: 13
01 Bandit replacements
« Reply #6 on: May 21, 2006, 08:50:23 AM »
I picked up a pair of 01 forks for the 00 Bandit. New problem though.  When reinstalling found that Nissan brake calipers don't match exactly on width to tubes.  Trying to figure out what to machine (caliper mount, fork mount, or add spacer to axle.  Anyone deal with this before??
Logged

Offline Inahurry

  • Board Regular!
  • **
  • Posts: 13
Problem Solved
« Reply #7 on: May 29, 2006, 10:09:31 PM »
FYI For those creative suspension peeps.
OO Bandit triple tree is @1/4 inch narrower than the 01.
Requires shaving (love my new grinder) of the right side caliper mounts and the fender mopunts for the 01 to get the 01 fender to fit.
After all that trouble I should have gone inverted.

I can't help it...I like to share my problems with the world.
Saves me money ...... I don't have to go to the shrink.
Logged
Pages: [1]
« previous next »