Author Topic: Pics of latest Mods for my B-12 (Read 4061 times)

gdavis2265 · « **on:** November 22, 2006, 10:35:36 PM »

Guys (and gals) I wanted to share my latest mods for my new B-12

1.) Homemade Lisc. plate bracket - Cut out of 11 ga. and rolled to wheel & chain radii then welded. Used them there Lite'N Boltz for illumination. Also machined some alum wireway blocks (where the old chain guard use to reside- never liked them things any ways) and used some water drip hose for the wire run.

2.) GSXR Steering stabilizer. Mounted using a small angle bracket located on the upper oil cooler mount. Body mounted to the blined tapped hole underd the lower triple tree. Only uses 3/4 of the original stroke, but linear movement is greatest when bars pointed straight (ie.. when you need it the most) - less linear movement when bars are cranked to the stops. I think it might just work- Hell, it was $10 on e-bay.

3) Intigrated tail light/turn signals [not shown]
4) Busa rear shock [not shown]

hope these pics work

http://good-times.webshots.com/photo/2152116900099097893zmfeNm

http://good-times.webshots.com/photo/2707923040099097893eIrVwL

http://good-times.webshots.com/photo/2991093520099097893wfhLmF

Desolation Angel · « **Reply #1 on:** November 22, 2006, 10:55:49 PM »

I especially like the license plate holder.

Rocketjock · « **Reply #2 on:** November 24, 2006, 10:15:23 AM »

That plate is cool. I wonder if you'll get stopped for not having a clearly readable plate?

gdavis2265 · « **Reply #3 on:** November 24, 2006, 11:18:07 AM »

Yea, I was wondering the same thing. I tucked it inside the rim a bit too far. We will see, if it's a major problem, I'll make another one with less offset.

RMR Bandit · « **Reply #4 on:** December 08, 2006, 07:37:06 PM »

Did something similar with the plate. Just hung and arced it over the disc.

http://i2.photobucket.com/albums/y12/RMR98/100_2263.jpg

gdavis2265 · « **Reply #5 on:** December 08, 2006, 08:35:02 PM »

Nice bike,
love the white letter tires and polished rims-
Cops give you any trouble with that plate yet? I see more and more of them. Got any more pics of your Bandit?

CWO4GUNNER · « **Reply #6 on:** December 08, 2006, 09:54:53 PM »

Everything looks cool, just be careful of that minimal chain guard/ license plate holder as the long original was engineered for a good reason. Make sure you don’t wear baggy long pants, loose fitting cuffed jeans and velcro lacing around the ankles are secure because you might feel yourself snatched off the back seat.

RMR Bandit · « **Reply #7 on:** December 08, 2006, 11:01:31 PM »

http://i2.photobucket.com/albums/y12/RMR98/100_1389.jpg
http://i2.photobucket.com/albums/y12/RMR98/100B0780.jpg

No problem with the cops. Had it on 6 months. I try not to bring attention to myself beyond the pipe. They have been behind me, but I think they have bigger fish to fry. And it is very readable. Colorado law simply states it must be visible from the rear and leaves it at that. I've seen waaaay worse around here.

gdavis2265 · « **Reply #8 on:** January 16, 2007, 12:07:25 AM »

http://good-times.webshots.com/photo/2556168250099097893AMXDZW

2005B12S · « **Reply #9 on:** January 19, 2007, 10:11:42 AM »

I would not use the oil cooler mount for anything other than the cooler itself. No need to induce any unneeded loading at that point, you risk overstressing the the tabs that hold the cooler in place.

It would probably be better to either use a frame strap or drill/tap the frame for mounting the damper.

Good Luck, Ed.

Dave 02 1200 · « **Reply #10 on:** January 19, 2007, 12:57:47 PM »

What kind of frame sliders are you using?