Bandit Alley

MODEL SPECIFIC => BIG BANDIT BANTER => Topic started by: blackbandit on September 30, 2007, 11:10:04 AM

Title: fitting a advancer
Post by: blackbandit on September 30, 2007, 11:10:04 AM

just got a 5 degree ignition advancer to put into bike (98 b12)how does one stop the rotor from turning whilst trying to undo
put it in gear but still turns  :duh:

Title: fitting a advancer
Post by: chupacabra on September 30, 2007, 08:24:57 PM

You remove the allen bolt in the center and the ignition advancer pulls out. Put a wrench on the ignition advancer to hold it and brake the center bolt loose, remove the bolt, the ignition advancer does not unscrew it just slides off.

Title: fitting a advancer
Post by: JamieK on September 30, 2007, 08:57:22 PM

Quote from: "chupacabra"

You remove the allen bolt in the center and the ignition advancer pulls out. Put a wrench on the ignition advancer to hold it and brake the center bolt loose, remove the bolt, the ignition advancer does not unscrew it just slides off.

Yup just how I did it :grin: