Bandit Alley

MODEL SPECIFIC => BIG BANDIT BANTER => Topic started by: Katamaniac on June 07, 2007, 11:59:21 AM

Title: Lowering Links for the 1250
Post by: Katamaniac on June 07, 2007, 11:59:21 AM

I have called the dealership in my area about lowering links for the new Bandit. There isn't any available yet. I did look up the part number for the links and they are the same part numbers as the 2005 B12. I would assume that since the part numbers are the same, the lowering links should work for the B1250.

I'm looking for any other thoughts on this before I drop $65 for a set of links.

Title: Lowering Links for the 1250
Post by: leedogg on June 07, 2007, 01:09:33 PM

Holeshot's site has a pic of thier's but they are not available for sale yet...I was over there last night looking to see if his pipes were ready yet.  He has the 1250 section set up- but only a few things on sale already.

Title: Lowering Links for the 1250
Post by: Red01 on June 07, 2007, 11:12:05 PM

I don't understand this... if the 1250's links are the same p/n as the 1200, Dale's B12 links would work the same too.
Maybe Dale is just trying to be sure they're the same?

If you want to save some coin, there's some available in this thread for $5.50. (http://forums.banditalley.net/viewtopic.php?t=8821&highlight=dogbones)

Title: Lowering Links for the 1250
Post by: Katamaniac on June 08, 2007, 11:18:38 AM

Thanks for the info.
I might just try the steel ones to see if it works. I will just be out $5.50.