Author Topic: Mirror Extenders for 2nd Gen Bandit - ON EBAY NOW  (Read 6926 times)

Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
Mirror Extenders for 2nd Gen Bandit - ON EBAY NOW
« on: May 14, 2008, 11:01:57 AM »
I have someone who will produce delrin mirror extenders for the 2nd Gen B1200s, but he needs a stock mirror for the initial fabrication.

Anyone have an old/damaged mirror they can send me to give to him?  Once he gets the extenders fabbed, they will be less than $25 per set.

Also, anyone interested in a group buy on these, please post up here so I can give him an approximate count.

UPDATE:  Price could be as low as $16 per set on a group buy of 10+
« Last Edit: July 09, 2008, 11:20:14 AM by PaulVS »


Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: $25 Mirror Extenders for 2nd Gen Bandit
« Reply #1 on: May 14, 2008, 11:22:03 AM »
Couple of quick questions.....

Delron is white in color I believe... how is that going to look??

$25.00 per set with or without shipping???

How much extension and are new bolts included???
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
Re: $25 Mirror Extenders for 2nd Gen Bandit
« Reply #2 on: May 14, 2008, 11:34:54 AM »
Couple of quick questions.....

Delron is white in color I believe... how is that going to look??

$25.00 per set with or without shipping???

How much extension and are new bolts included???

It's "delrin".  They are black.

Shipping not included, probably around $5-6

New bolts are included.


Offline txbanditrydr

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 1518
Re: $25 Mirror Extenders for 2nd Gen Bandit
« Reply #3 on: May 14, 2008, 12:27:05 PM »
Thanks, Paul....  I've seen white delrin a lot hence the question.  Any idea on how long the extension are?????  :thanks:
'01 B600S ... sold
'05 B1200S ... Top 20 mods... #20 through #2 - All The Usual Ones, Yada, Yada  & #1... 150,000+ Miles and Counting!!!!

Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
Re: $25 Mirror Extenders for 2nd Gen Bandit
« Reply #4 on: May 14, 2008, 12:40:16 PM »
I believe they are ~ 3/4".

I also got a price update on a group buy.  They could be as low as $16 per set for an order of 10+
« Last Edit: May 14, 2008, 12:41:53 PM by PaulVS »


Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
Re: Mirror Extenders for 2nd Gen Bandit
« Reply #5 on: May 27, 2008, 09:54:17 PM »
The mirror extenders are ready.  I gave him one of my mirrors to use as a template, and he gave me the 'prototype' set.  They look great as you can see...





I measured them and they are 1" thick.

No set price yet... probably in the $16-24 range, plus shipping.

Anyone interested in that price range should PM me.  He doesn't know how much material he has to make these yet, so it'll be first-come-first-served. 
« Last Edit: May 27, 2008, 09:55:58 PM by PaulVS »


Offline SteelD

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 274
    • Route 66 in 2010
Re: Mirror Extenders for 2nd Gen Bandit - AVAILABLE NOW!
« Reply #6 on: May 28, 2008, 07:17:09 AM »
I got these off of eBay to fit my 1250. They came with new bolts and are well-engineered. Is it the same guy?

David
Bandit 1250SAK7 Graphite Metallic Blue (YLE)


Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
Re: Mirror Extenders for 2nd Gen Bandit - AVAILABLE NOW!
« Reply #7 on: May 28, 2008, 11:04:32 AM »
I got these off of eBay to fit my 1250. They came with new bolts and are well-engineered. Is it the same guy?

Could be.  He told me he used to be the 'top dog' in this business a few years ago, but he stopped making them.  He wants to get back into it again.

How much did you pay for them?


Offline SteelD

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 274
    • Route 66 in 2010
Re: Mirror Extenders for 2nd Gen Bandit - AVAILABLE NOW!
« Reply #8 on: May 28, 2008, 11:40:40 AM »
I got these off of eBay to fit my 1250. They came with new bolts and are well-engineered. Is it the same guy?

Could be.  He told me he used to be the 'top dog' in this business a few years ago, but he stopped making them.  He wants to get back into it again.

How much did you pay for them?
Cost me $24 inc. bolts and they were made from black Delrin.
David
Bandit 1250SAK7 Graphite Metallic Blue (YLE)


Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
Re: Mirror Extenders for 2nd Gen Bandit - AVAILABLE NOW!
« Reply #9 on: May 28, 2008, 01:31:38 PM »
Okay... cost is going to be $28 shipped to Con-USA.

Right now we're up to 11 orders.  I'll probably an extra set or two (if he has enough material to make that many) just in case there's any late-comers to the party.  If I have leftovers, I'll sell them on fleabay.

This is who I have gotten commitments from so far on this website:

T748
dpturner - PAID

Here's how your cost breaks down....

1.  My total cost of 11 sets shipped to me.
2.  Postage (flat rate for everyone in the USA) via USPS Priority Mail
3.  Packaging (Probably will do bubble-mailer packs)
4.  Gas/time/energy
5.  My initial cost of shipping him my mirror ($7)
6.  Paypal's 3% cut.
7.  A 6-pack of Sam Adams for me.

... divided by 11.

I'm doing a 'flat rate' shipping because I don't want to have to figure out everyone's individual postage, unless you're outside the USA, which will be whatever my cost is.

I'd prefer paypal so we can get this order expedited... but if that's not an option, you can send a check or M/O .  I will wait until everyone's paid before I place the order.  Once I give him the go-ahead, he says he can have them ready in less than a week.  I'll then ship them out within a day or two after that.

If this isn't amenable to anyone who told me they wanted a set, just let me know via PM, and I'll adjust the order accordingly.  I'll PM everyone who said they wanted a set with my PayPal address.  Again, if PayPal doesn't work for you, let me know, and I'll give you my mailing address for a check or money order.

Paul
« Last Edit: May 28, 2008, 02:23:30 PM by PaulVS »


Offline T748

  • New user!
  • *
  • Posts: 7
Re: Mirror Extenders for 2nd Gen Bandit - AVAILABLE NOW!
« Reply #10 on: May 29, 2008, 04:47:31 AM »
I'm off work in about 5 hours, I'll send by paypal then. Thanks-Tom.
05 Bandit 1200S

Offline Jimmy Tom

  • TURBO TYPER!
  • **
  • Posts: 27
Re: Mirror Extenders for 2nd Gen Bandit - AVAILABLE NOW!
« Reply #11 on: May 30, 2008, 02:13:31 PM »
Paul, can I still get into the buy?  Please.  If so, I'll pay pal from home this evening
Jim
STOC # 753
jimmorrow203@msn.com
Billings, MT  RiderCoach
91 ST1100 Black, 03 1200S, 96 DR650

Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980
Re: Mirror Extenders for 2nd Gen Bandit - AVAILABLE NOW!
« Reply #12 on: May 30, 2008, 02:23:49 PM »
Sorry, I already placed the order.

If all goes well... I'll see how many people are interested in a 2nd group buy.


Offline orionburn

  • Board Homesteader!
  • ***
  • Posts: 270
Re: Mirror Extenders for 2nd Gen Bandit - AVAILABLE NOW!
« Reply #13 on: June 05, 2008, 11:20:31 AM »
Crap...that's what I get for not getting on here for a week or two. Definitely count me in if you have any extras or if there is another group buy.
The difference between genius and stupidity is that genius has its limits.

87 FZR1000
03 Bandit 1200S

Offline PaulVS

  • Board Homesteader!
  • ***
  • Posts: 980