Bandit Alley
MODEL SPECIFIC => BIG BANDIT BANTER => Topic started by: b1200 on November 21, 2005, 03:05:43 PM
-
Hi, as part of a streetfighter project I would like to replace the stock speedo with a mini speedo from Drag Specialties. They sell 2 versions,
- 2240:60 ratio
and 2:1 ratio.
Does anyone know which one would be correct for a 99 Bandit 1200?
Thanks very much
Tim :motorsmile:
-
Also available is a 1:1 ratio speedo.
OK, let me ask another question.....
Does anyone know of an aftermarket speedo (a small one, preferably) that would work on a 1200 Bandit?
Thanks!!
-
www.banditmania.co.uk has a nice digital speedo/tach that is quite small and looks nice too. Their site is down at the moment so I can't get a picture of it.
-
http://www.acewell-meter.com/DEFAULT.asp
I was looking into one of these units till I figured out how to fix mine.
-Randy
-
Thanks for the info.
FWIW, I took the advice of a friend and wrapped a little piece of tape around the end of the speedo cable, which is disconnected. Then I put a piece of tape on the wheel. As the wheel turns 1 revolution, the speedo cable turns 2. I guess this is a 2:1 ratio.
Tim