Author Topic: Zero Gravity ST Windscreen install issues (Read 4664 times)

stormi · « **Reply #15 on:** May 19, 2007, 12:29:28 AM »

Quote from: "mushupork"

Small socket set [5/16"] and 3 minutes solved the problem. Loosened two small bolts, slightly pivoted the front brake down and we are good to go - thanks for the help.

5/16"? The b12 is metric, isn't it?

Mongo · « **Reply #16 on:** May 19, 2007, 08:59:12 AM »

Quote from: "mushupork"

Small socket set [5/16"] and 3 minutes solved the problem. Loosened two small bolts, slightly pivoted the front brake down and we are good to go - thanks for the help.

Quote from: "Mongo"

Loosen the bolts on the clamp and rotate it forward!

forward down the same thing!

ZenMan · « **Reply #17 on:** May 19, 2007, 10:25:14 AM »

Quote from: "stormi"

Quote from: "mushupork"
Small socket set [5/16"] and 3 minutes solved the problem. Loosened two small bolts, slightly pivoted the front brake down and we are good to go - thanks for the help.

5/16"? The b12 is metric, isn't it?

Many metric and standard sizes are nearly identical... such as 13mm and 1/2", or 8mm and 5/16" in this case. Can come in handy in a pinch.

mushupork · « **Reply #18 on:** May 19, 2007, 12:39:24 PM »

I too thought the metric vs. standard thing was odd. Glad I wasn't the only one

stormi · « **Reply #19 on:** May 19, 2007, 05:14:03 PM »

You know,.. I don't think I've ever pulled the standard tools out when working on the bikes.

It stands to reason that some of them would be the same, I guess I was just confused as to why a person would have the standard tools out to try with.

chupacabra · « **Reply #20 on:** May 20, 2007, 06:55:59 AM »

I think a 1/2inch and a 12mm would be a better match then a 1/2inch to

13mm!

ZenMan · « **Reply #21 on:** May 20, 2007, 11:20:36 AM »

Quote from: "chupacabra"

I think a 1/2inch and a 12mm would be a better match then a 12inch to 13mm!

You mean 1/2inch, not "12inch" I assume?

Sorry, but your'e wrong. Go check it out for yourself... bet you a beer!

A 12mm socket is too small to fit on a 1/2" nut, and a 1/2" wrench is too big for a 12mm nut. 13mm and 1/2" are almost exactly the same size.

Nitpickers...