Author Topic: 2000 Bandit 1200 Part Out (Almost) - Marietta GA, USA  (Read 2797 times)

Offline magnetnerd

  • New user!
  • *
  • Posts: 4
2000 Bandit 1200 Part Out (Almost) - Marietta GA, USA
« on: February 07, 2011, 10:47:33 PM »
I'm streetfightering my B12 and need to get rid of a bunch of parts.

I posted this a looong time ago, and never got much of a response.

I will have pictures up of the parts relatively soon (hopefully). However, if you're especially interested in an item that I have, ask and I'll get you a pic within a couple days, tops.

I have plastics, pegs, subframe, airbox, etc. Unless it's from the engine, I probably have it.

I'll get a list of parts going with prices soon. Until then, confirm I have the part and I'll set a price that's OBO.

(disclaimer:...I'm not really sure how clear this post is as I'm dead tired. )

Offline gamewood

  • Newbie paid cash for a really good bike
  • TURBO TYPER!
  • **
  • Posts: 49
Re: 2000 Bandit 1200 Part Out (Almost) - Marietta GA, USA
« Reply #1 on: April 03, 2011, 11:41:51 PM »
did you ever get pics up?  interesting in what parts can be transfered to the '03 with efi conversion (throttle bodies etc...)
5.9L GC...fast
427 sbc 91 vette...sometimes faster
4.7L 06' GC...baby's momma hauler
oh yeah a 49 state 1200s green GSF

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
Re: 2000 Bandit 1200 Part Out (Almost) - Marietta GA, USA
« Reply #2 on: April 04, 2011, 12:23:58 PM »
Frame and bodywork are different on the 2000 (1G) than the 2003 (2G), so items like plastics, airbox and subframe aren't easily interchanged.  The rear footpeg hangers are different, but the pegs themselves will cross.

There are even subtle differences in the engines (different alternator, clutch, cylinder block, carbs), though if you swap at a high enough assembly will interchange.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline slazenger

  • TURBO TYPER!
  • **
  • Posts: 21
Re: 2000 Bandit 1200 Part Out (Almost) - Marietta GA, USA
« Reply #3 on: April 14, 2011, 04:49:54 PM »
I have a 2000 B12 and need the right side (brake side) frame plastic insert above the brake pedal (black flat oblong cover) Thanks
TEX