Bandit Alley
THE MARKETPLACE => BIKES/PARTS/GEAR for sale/wanted => Topic started by: MLambert19 on December 07, 2011, 09:55:40 PM
-
I finally found an OE red cowl for my bike, but it's missing the mounting hardware.
If anyone here has a solo cowl on their Bandit 400, I'm in need. I have a good sheet metal shop that can fab one, but I either need the dimensions, or a template. Or, send me yours, I'll have them duplicate it, and I will promptly return it... shipping paid both ways and then some.
Can you help? matthew.f.lambert@gmail.com
Thanks, and Happy Holidays! -Matt
-
I have the fiberglass gimble one, the rear mounting bracket on the underside was liberated. Should still be able to use/modify it...
-
I hacked up an old passenger seat pan I bought on eBay and attached the solo cowl to it. It still needs a bit fine tuning for the perfect fit, but it's good enough now... All it takes is removing two bolts and I can switch to the passenger seat when required.
(http://interfusedesign.files.wordpress.com/2011/12/20111211-234731.jpg)
(http://interfusedesign.files.wordpress.com/2011/12/20111211-2347541.jpg)
-
notaduc: "Liberated"? Meaning you are not using it? Assuming the holes are in the same spot (or close) on both... send me an e-mail or let me know. If you want to just "loan" it to me, that's fine too...
Mike: I will never have a passenger on my B4. I have a SV1000N for that! So easy removal isn't nearly as much a concern as getting it lined up correctly and mounted semi-permanently. But thanks for the insight, and it is a good idea for folks who might want to swap back more often than I.
Thanks guys, -Matt