Bandit Alley

GENERAL MOTORCYCLE FORUMS => GENERAL MECHANICAL & TECHNICAL => Topic started by: elbandido on March 18, 2005, 06:28:38 PM

Title: 2000 bandit 600 cluster gauge, clock
Post by: elbandido on March 18, 2005, 06:28:38 PM

i recently purchased a used 2000 suzuki bandit 600, and can't figure out how to set the digital clock on the gauge cluster.  can anyone help me out? :motorsmile:

Title: this is right out of my manual
Post by: dsartwell1 on March 18, 2005, 06:46:35 PM

push both buttons simultaneously, adjust minutes by pushing the reset button, then push select to move to the hours, push reset button to adjust the hours, push select to set. This is not verbatum but thats how you do it. I had the manual in my hand when I wrote this. Those clocks can be a real pain in the ass. You have to hold both buttons down a little longer than you might think.  Good luck

Title: thank you!!!
Post by: elbandido on March 18, 2005, 06:54:52 PM

thanks so much for the help, dsartwell1.

so glad to be a part of this forum.