Bandit Alley

GENERAL MOTORCYCLE FORUMS => GENERAL MECHANICAL & TECHNICAL => Topic started by: dave0 on November 13, 2008, 07:02:49 AM

Title: bandit fork's
Post by: dave0 on November 13, 2008, 07:02:49 AM

hi all,

 thought it was time i joined the forum as being nose bagging on here for a while now.
 just got bake into my bandit's again(another born again rider)need to pick your brain's
 about my bike.well bought a 2000 k series 600 bandit and need some info on fork's.
 i know they are 41mm but will the fork's of the older bandit or even the 650 bandit fit my bike.
 got a bend in one of mine and was thinking if the insert's were the same.any help would be greatfull.

 thank's dave

  :banghead: :banghead: :banghead: :banghead: :grin: :grin: :grin:
 

Title: Re: bandit fork's
Post by: Red01 on November 13, 2008, 05:18:54 PM

 :welcome: to the site - now that you've stepped up from lurker to participant.  :bandit:

Look up the part numbers in one of the many online sources and see...

Title: Re: bandit fork's
Post by: dave0 on November 14, 2008, 04:41:04 AM

thank's for the welcome,
       part numbers are bound to be different with them being suzuki.some people say the sv 650 has the same insert too.
       don't want to go and buy one unless i know for sure.thank's for the reply.


      :thanks: :thanks: :thanks: :thanks: :thumb: :thumb: :thumb: