Author Topic: exhaust bolts size question. (Read 2736 times)

dimitry · « **on:** April 04, 2006, 11:10:12 PM »

Hi, im taking my exhaust off the bike this weekend and i noticed the hex key are something in betwen 6 and a 7 mm.

I dont want to strip it and i dont have nothing in betwen. So i was curious if anyone had the size of the hex key, so i can but a good quality one to take the bolts that hold the exhaust to the engine.

Danke.

Dimitry.

Cruisecontrol · « **Reply #1 on:** April 05, 2006, 05:43:34 AM »

A 6mm allen key is the one you need and if you want to avoid removing the oil cooler then you will need a long allen key to give you enough clearance to remove the bolts.

dimitry · « **Reply #2 on:** April 05, 2006, 10:04:06 AM »

Quote from: "Cruisecontrol"

A 6mm allen key is the one you need and if you want to avoid removing the oil cooler then you will need a long allen key to give you enough clearance to remove the bolts.

Hi, thanks for your answer.

I tryed a 6 mm allen wrench and has play in it, but 7 is too big.

Dimitry.

vadim · « **Reply #3 on:** April 05, 2006, 11:32:38 AM »

Have you tried 1/4"? That comes out to 0.635 and may fit snugly.

fritobandito · « **Reply #4 on:** April 05, 2006, 01:13:18 PM »

You'll still need a long allen wrench regardless of whether you take the oil cooler loose or not so you can clear the pipes and get a good turn on it. By the way, two screws gets the oil cooler out of the way. Not a problem.