Bandit Alley
GENERAL MOTORCYCLE FORUMS => GENERAL MECHANICAL & TECHNICAL => Topic started by: 12sdrag on May 25, 2005, 08:13:49 PM
-
I would like to hard wire my gps on my bandit. what size fuse do you think? can i go straight to the battery or should i use a bus bar?
-
my gps is 6 volt, when I got the Bandit, it had a 12 V to 6 V transformer mounted under the plastic.
-
Bholland,thanks but is that because the lights and stuff are 6volt? I think that my gps has a step down in the power cable that plugs into the 12volt outlet.
-
Ok, you would need to fuse it, if you want to keep it for a long time, Safe than sorry! Do you know what the power is in watts that it uses? if so you can work out the Amps.
V = 12, Watts = 20, would be 0.6Amps. Volts divid by watts = Amps!
Then fit an Amp to suit!
-
It wouldn't need an appreciably larger fuse than, the fuse that is actually in the lighter adapter itself.
Chances are, the fuse in the lighter adapter is 1-2 amps. The GPS units don't draw a heck of a lot of amps.
You might consider mounting a cigarette lighter socket somehwere, and powering it off of that.
-
thanks guys, feel somewhat like an idiot. I wire these things in boats all the time. Don`t know why I thought it would be different on my bike? Oh, the manual that comes with it tells exactly how to do it and fuse size.