Bandit Alley

GENERAL MOTORCYCLE FORUMS => GENERAL MECHANICAL & TECHNICAL => Topic started by: FreediverGa on October 29, 2005, 05:16:06 PM

Title: kickstand switch
Post by: FreediverGa on October 29, 2005, 05:16:06 PM

Is there anyway to by pass the kickstand safety switch so you don't have to have the switch at all ?

Title: Re: kickstand switch
Post by: jeepskate99 on October 29, 2005, 05:19:52 PM

Quote from: "FreediverGa"

Is there anyway to by pass the kickstand safety switch so you don't have to have the switch at all ?

On my old bike I just cut the wires and soldered them together.

Title: kickstand switch
Post by: B12NScott on October 29, 2005, 10:03:45 PM

On my DRZ I just clipped and spliced together under the seat.   :bigok:

Title: kickstand switch
Post by: FreediverGa on October 29, 2005, 10:19:00 PM

ok cool that's what I'll do then!

Title: kickstand switch
Post by: Desolation Angel on October 29, 2005, 10:57:26 PM

Just curious...

Why bypass it?

Title: kickstand switch
Post by: FreediverGa on October 29, 2005, 11:05:58 PM

taking it off to go to the track!

Title: kickstand switch
Post by: Desolation Angel on October 29, 2005, 11:06:38 PM

Ahhhh, I see.

Title: kickstand switch
Post by: billster on October 31, 2005, 04:33:56 AM

I wanna take it off because it insults my experience and intelligence!  Period!  :soapbox:

Now where did I leave that damned helmet?

 :shock:

Title: kickstand switch
Post by: B12NScott on October 31, 2005, 02:01:13 PM

On my DRZ; everytime I went off a jump or hit a bump the kick stand switch would cut the engine for a 1/2 second and come back on.  like a low speed rev limiter.    :thanks:  Mother Zuk.  I haven't had that problem on my B-12.  Yet...