Bandit Alley

GENERAL MOTORCYCLE FORUMS => GENERAL MECHANICAL & TECHNICAL => Topic started by: gearset01 on August 15, 2006, 05:48:04 PM

Title: Mikuni part numbers for Mikuny carbs parts.
Post by: gearset01 on August 15, 2006, 05:48:04 PM

Does anyone have or know where to get mikuni's part numbers.
Looking for shims and 110 mains for my Mikuni carbs. 05 1200 s USA non CA model.

Thanks.
PIN :motorsmile:

Title: Mikuni part numbers for Mikuny carbs parts.
Post by: PaulVS on August 15, 2006, 06:17:18 PM

By the way... I checked the microfiche's for the 2001-2005 (2nd Gen) Bandits... and the pilot jets are the same for all - 15's.

You can go with 20's if you're going to swap out the mains.

Title: 15-20
Post by: gearset01 on August 15, 2006, 07:53:54 PM

Thought I read somewhere that a guy had the dealership install the 20s no-charge because Suzuki had made a change,
HhhhMMmmm, been wrong before.

I put the dirty filter back in and there is quite differance it pulls way better no-lag. You were right its the leaness rearing its ugly head. Thanks Paul.

Gonna do the deed I think and yank the carbs and see what I can break.
Hopefully someone will come to my aid with some part numbers and direction when I need it. Maybe they could add the part number for the 20s as well, and the size of any replacment bolts for the carbs.         Thanks as always for any and all help.PIN

Title: carb parts
Post by: tacoman on August 18, 2006, 04:08:41 PM

Sudco has all kinds of carb parts, just go to www.sudco.com.