Author Topic: ticking  (Read 3388 times)

Offline philm

  • New user!
  • *
  • Posts: 9
ticking
« on: August 18, 2005, 10:12:36 AM »
i have a 96 n600 its done about 36000 miles when i rev the bike you can hear a ticking . a mate said it was the tensioner i seem to remember reading in a book that they need replaceing but i can't remember when
before i start throwing cash at it what do you think it is. and should i  :stop:  rideing it. it runs a little bit flat but you hardly notice it

Offline wyntrblue

  • Board Homesteader!
  • ***
  • Posts: 103
ticking
« Reply #1 on: August 18, 2005, 03:07:50 PM »
my bandit 4 has the same problem, took it to a garage thinking my valve clearences were out, he checked them and said it was my cam chain knocking the rocker cover coz of the tensioner. not hard to sort, just have to find one....

Offline land_shark

  • Board Homesteader!
  • ***
  • Posts: 229
ticking
« Reply #2 on: August 18, 2005, 05:29:23 PM »
I'm with wyntrblue.  I'm guessing valve clearances.  Most likely they are loose, wich is loads better than too tight.
Jason
2000 B12 "Hiro"
2001 KLR650 "Putt-putt"
2005-ish 47cc Cagllari "Balzac"

Offline wyntrblue

  • Board Homesteader!
  • ***
  • Posts: 103
ticking
« Reply #3 on: August 18, 2005, 06:47:04 PM »
think you got the wrong end of the stick.... my valve clearences were fine, the mechanic thinks its my cam chain tensioner that is duff,

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
ticking
« Reply #4 on: August 18, 2005, 08:06:31 PM »
The first step would be to rule out valve noise. Keep in mind, the B6 engine's valves are noisey when in proper adjustment. As someone in another thread said, they'll sound like a bunch of mice with typewriters... and the noise will be uniform. Cam chain noise will not be as uniform and generally makes more noise under changes in rpm or occasional slaps under steady state rpm.
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline philm

  • New user!
  • *
  • Posts: 9
ticking
« Reply #5 on: August 22, 2005, 04:29:40 PM »
you notice it badly when you let go of the revs and a bit when you accelerate . i no it will have to be done but should i stop rideing it untill it's done

Offline Bazza

  • Board Homesteader!
  • ***
  • Posts: 466
ticking
« Reply #6 on: August 28, 2005, 02:25:37 AM »
Quote from: "philm"
you notice it badly when you let go of the revs and a bit when you accelerate . i no it will have to be done but should i stop rideing it untill it's done


Hey I have a 1983 V-45 Honda thats been making the same noise for the last 20,000 km. Has not blown up yet!