Author Topic: Indicator Light (Read 4116 times)

SHREDDER · « **on:** December 01, 2005, 08:01:20 PM »

Does anyone know how to replace the high-beam indicator bulb in a 1G 600?

Red01 · « **Reply #1 on:** December 01, 2005, 11:06:40 PM »

Take the panel apart and replace the bulb.

SHREDDER · « **Reply #2 on:** December 02, 2005, 04:56:02 PM »

Can I do that without removing the windshield/fairings?

Red01 · « **Reply #3 on:** December 03, 2005, 01:24:53 AM »

That, I'll have to leave to a 1G owner.

chevsuz12 · « **Reply #4 on:** December 03, 2005, 01:31:24 AM »

When I had a fairing on my 1G B12, I simply turned the bars all the way to the right, stuck my hand in and removed the rubber boot, unplugged the light, released the pin, and the bulb was free.

SHREDDER · « **Reply #5 on:** December 03, 2005, 01:50:42 AM »

I believe you might be thinking of the high beam bulb itself. I'm trying to replace the bulb inside the instrument cluster the little blue indicator.

Red01 · « **Reply #6 on:** December 03, 2005, 04:49:59 AM »

Since the instrument cluster & idiot light panel are fork mounted on the 1G, I don't see why the fairing would have to come off... but I don't have one sitting here to look at to see what access might be like.

chupacabra · « **Reply #7 on:** December 03, 2005, 06:40:15 AM »

I've never had to replace one of those lights but you can remove the instrument cluster & idiot light panel with the plastics on.

SHREDDER · « **Reply #8 on:** December 03, 2005, 04:35:43 PM »

Thanks I hope so. I'll see what happens. I guess if those things were made with LED's I wouldn't have this problem.

ray nielsen · « **Reply #9 on:** December 04, 2005, 09:31:36 PM »

The second generation 1200 instrument panel uses LEDs and they're replaceable -- they plug into sockets. Suzuki doesn't have a part number for them but your friendly Radio Shack carries them in various colors.

Oldschooler · « **Reply #10 on:** December 06, 2005, 12:21:07 AM »

No.. you don't have to remove the fairing. You'll have to turn the full left and full right to get at the screws though. They are on the underside of the little insterment cluster. You'll also have to use a shorty phillips screwdriver in order to have enough clearance. Remove two screws and the whole thing wil lift off. You may have to feed just a little bit of the wiring through the mount so you can get it up enough to work on.
Good luck with it.

SHREDDER · « **Reply #11 on:** December 06, 2005, 08:32:21 PM »

Thanks Old Schooler! I didn't think it was that easy. I have a feeling it burnt out cause I ride in the daytime with my high beams on.