Author Topic: How fast......again  (Read 5839 times)

Offline 2WheelinDaily

  • New user!
  • *
  • Posts: 9
How fast......again
« Reply #15 on: November 11, 2005, 12:26:47 PM »
Stock 2003 B12- 140mph indicated just into 5th (previously GPS says 80mph ind. vs. 75mph gps)


Offline ZipTi

  • Board Homesteader!
  • ***
  • Posts: 58
How fast......again
« Reply #16 on: November 12, 2005, 12:43:44 PM »
gotta roll my pant legs way up.  :bs:
97' b12 (ZipTi) Rental fatbars, 407lbs, 520 conversion, CRG levers & mirror, FoxShox & motoCD forks, EBC HH's & Rotors, Goodridge SS lines, Trail Tech 8" headlamp, Vepor gauge/computer, all Titanium hardware, unbraced rear caliper stay, Alloy Subframe, Monster seat, 707  racing axles, GSXR blue, 70k miles...
98' GSF1200 bagger (Junior) ready to roll....

Offline mike

  • Board Homesteader!
  • ***
  • Posts: 689
How fast......again
« Reply #17 on: November 12, 2005, 03:18:22 PM »
Kentucky needs some flat, straight, smooth  and uninhabited roads in wide open spaces....  It's not too difficult to wind her out in the right conditions, I checked mine in remote west TX-no trees, no traffic, no cops....  An ambulance woulda been a long way off if I f---ked up though...

 :monkeymoon:

Offline Bob Holland

  • Board Homesteader!
  • ***
  • Posts: 510
How fast......again
« Reply #18 on: November 12, 2005, 06:07:38 PM »
Most stock bikes want pull much in top gear, so when you top out in 4TH gear, you are probabley doing all she will do. If your bike will pull to 9500 in 4th, that is a true 142 mph with stock gearing, 15/45
 rpm       -- 1st         -- 2nd       --  3rd    --     4th     --    5th
 8,000  --52.7   --77.0   --100.5  --120.3--   137.6
 8,500   --56.0   --81.9   --106.8  --127.8  --146.2
 9,000    --59.3-- 86.7--   113.1--  135.3--  154.8
 9,500 --   62.6--   91.5--   119.4--  142.8--  163.4
 10,000 -   65.9- 96.3- 125.7--  150.3--  172.1
 10,500 -   69.2- 101.1-   131.9--  157.8--  180.7
If I didn't have a Suzuki, I would have a Kawasaki

Offline ZipTi

  • Board Homesteader!
  • ***
  • Posts: 58
How fast......again
« Reply #19 on: November 12, 2005, 07:47:58 PM »
straights are BORINg. :bigok:
97' b12 (ZipTi) Rental fatbars, 407lbs, 520 conversion, CRG levers & mirror, FoxShox & motoCD forks, EBC HH's & Rotors, Goodridge SS lines, Trail Tech 8" headlamp, Vepor gauge/computer, all Titanium hardware, unbraced rear caliper stay, Alloy Subframe, Monster seat, 707  racing axles, GSXR blue, 70k miles...
98' GSF1200 bagger (Junior) ready to roll....

Offline mike

  • Board Homesteader!
  • ***
  • Posts: 689
How fast......again
« Reply #20 on: November 12, 2005, 07:52:31 PM »
No doubt... :)  But for this topic and thread, it's exactly what's needed.....  :bigok:

Offline Kickstart

  • Board Homesteader!
  • ***
  • Posts: 85
How fast......again
« Reply #21 on: November 13, 2005, 10:44:07 AM »
Hi

I know that on my (1997 Bandit) 170 indicated was bang on the red line in top on stock gearing and was 155mph true.

All the best

Keith

Offline Vlad

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 278
How fast......again
« Reply #22 on: November 13, 2005, 11:28:27 AM »
Quote from: "BHolland"
Most stock bikes want pull much in top gear, so when you top out in 4TH gear, you are probabley doing all she will do. If your bike will pull to 9500 in 4th, that is a true 142 mph with stock gearing, 15/45
 rpm       -- 1st         -- 2nd       --  3rd    --     4th     --    5th
 8,000  --52.7   --77.0   --100.5  --120.3--   137.6
 8,500   --56.0   --81.9   --106.8  --127.8  --146.2
 9,000    --59.3-- 86.7--   113.1--  135.3--  154.8
 9,500 --   62.6--   91.5--   119.4--  142.8--  163.4
 10,000 -   65.9- 96.3- 125.7--  150.3--  172.1
 10,500 -   69.2- 101.1-   131.9--  157.8--  180.7


Pardon me for being blunt, but this is about the only usefull info I have read in this thread. Stock speedo is so damn innacurate (mine is optimistic by 10-20%, and it's not linear either), so many of us have different tires and gearing that it all renders "indicated" speedo readings totally useless.

The only speed reading i consider reliable enough is GPS or radar gun reading. That said, I did 210 Km/h GPS (130.48795 miles/hour) and it was still pulling like a bat out of hell (it didn't feel anywhere near the top). The bike (bandit.xxc.cc) is a fairly stock 2002 1200S with drilled-out stock pipe and (acording to the previous owner - not yet confirmed) stage one jet kit. The bike has 21000Km on the odo (convert to whatever obsolete measure you want at metric.xxc.cc), stock sprockets and tires.

Cheers,
Vlad
Vlad lives in Toronto, Canada and rides http://bandit.xxc.cc

Offline Kickstart

  • Board Homesteader!
  • ***
  • Posts: 85
How fast......again
« Reply #23 on: November 13, 2005, 11:51:17 AM »
Quote from: "vlad"
Stock speedo is so damn innacurate and so many of us have different tires, sprocket setups etc. that it all renders "indicated" speedo readings totally useless.


Different tyres renders those figures inaccurate as well :stickpoke: .

All the best

Keith

Offline ZipTi

  • Board Homesteader!
  • ***
  • Posts: 58
How fast......again
« Reply #24 on: November 13, 2005, 12:05:13 PM »
also don't forget tire slip as well as clutch slip?
e
97' b12 (ZipTi) Rental fatbars, 407lbs, 520 conversion, CRG levers & mirror, FoxShox & motoCD forks, EBC HH's & Rotors, Goodridge SS lines, Trail Tech 8" headlamp, Vepor gauge/computer, all Titanium hardware, unbraced rear caliper stay, Alloy Subframe, Monster seat, 707  racing axles, GSXR blue, 70k miles...
98' GSF1200 bagger (Junior) ready to roll....

Offline mike

  • Board Homesteader!
  • ***
  • Posts: 689
How fast......again
« Reply #25 on: November 13, 2005, 12:38:32 PM »
Quote
with stock gearing, 15/45
rpm -- 1st -- 2nd -- 3rd -- 4th -- 5th
8,000 --52.7 --77.0 --100.5 --120.3-- 137.6
8,500 --56.0 --81.9 --106.8 --127.8 --146.2
9,000 --59.3-- 86.7-- 113.1-- 135.3-- 154.8
9,500 -- 62.6-- 91.5-- 119.4-- 142.8-- 163.4
10,000 - 65.9- 96.3- 125.7-- 150.3-- 172.1
10,500 - 69.2- 101.1- 131.9-- 157.8-- 180.7


Guys, I'm pretty sure these numbers are from a gearing formula/calculator.  They look like true mph to me.  The part yall are missing is your Bandit doesn't have the topend to hit those high rpm's in 5th.  Those numbers are generated by a gearing formula using stock gear ratios.  In 4th, with a lower ratio may hit the high rpm's.   See ?
I have no doubt at 130mph actual in 5th at under 8K, it feels very strong.  But push it up to 8.5K and see what happens...

All the bike tests dating back to 2001 for the bike mags have listed the B12 in 140's, that's true mph on a box stock Bandit.

I know many of you have modified bikes, but unless you've changed the stock cam, your power curve still poops out around 9K on the tach.  That's a differnt story if you have a gixxer cam, it'll cruise right by 9k still making progressive power...


I'm gonna shutup now, and move on...  yall discuss it all you want, the facts are pretty clear...

Offline Fromage

  • Board Homesteader!
  • ***
  • Posts: 52
How fast......again
« Reply #26 on: November 13, 2005, 01:01:39 PM »
This is the whole list someone posted it earlier and I saved it

RPM MPH MPH MPH MPH MPH
1,500 9.9 14.4 18.8 22.5 25.8
2,000 13.2 19.3 25.1 30.1 34.4
2,500 16.5 24.1 31.4 37.6 43.0
3,000 19.8 28.9 37.7 45.1 51.6
3,500 23.1 33.7 44.0 52.6 60.2
4,000 26.4 38.5 50.3 60.1 68.8
4,500 29.7 43.3 56.5 67.6 77.4
5,000 32.9 48.2 62.8 75.2 86.0
5,500 36.2 53.0 69.1 82.7 94.6
6,000 39.5 57.8 75.4 90.2 103.2
6,500 42.8 62.6 81.7 97.7 111.8
7,000 46.1 67.4 88.0 105.2 120.4
7,100 46.8 68.4 89.2 106.7 122.2
7,200 47.4 69.3 90.5 108.2 123.9
7,300 48.1 70.3 91.7 109.7 125.6
7,400 48.8 71.3 93.0 111.2 127.3
7,500 49.4 72.2 94.2 112.7 129.0
7,600 50.1 73.2 95.5 114.2 130.8
7,700 50.7 74.2 96.8 115.7 132.5
7,800 51.4 75.1 98.0 117.2 134.2
7,900 52.1 76.1 99.3 118.8 135.9
8,000 52.7 77.0 100.5 120.3 137.6
8,100 53.4 78.0 101.8 121.8 139.4
8,200 54.0 79.0 103.0 123.3 141.1
8,300 54.7 79.9 104.3 124.8 142.8
8,400 55.3 80.9 105.6 126.3 144.5
8,500 56.0 81.9 106.8 127.8 146.2
8,600 56.7 82.8 108.1 129.3 148.0
8,700 57.3 83.8 109.3 130.8 149.7
8,800 58.0 84.8 110.6 132.3 151.4
8,900 58.6 85.7 111.8 133.8 153.1
9,000 59.3 86.7 113.1 135.3 154.8
9,100 60.0 87.6 114.4 136.8 156.6
9,200 60.6 88.6 115.6 138.3 158.3
9,300 61.3 89.6 116.9 139.8 160.0
9,400 61.9 90.5 118.1 141.3 161.7
9,500 62.6 91.5 119.4 142.8 163.4
9,600 63.3 92.5 120.6 144.3 165.2
9,700 63.9 93.4 121.9 145.8 166.9
9,800 64.6 94.4 123.2 147.3 168.6
9,900 65.2 95.3 124.4 148.8 170.3
10,000 65.9 96.3 125.7 150.3 172.1
10,100 66.5 97.3 126.9 151.8 173.8
10,200 67.2 98.2 128.2 153.3 175.5
10,300 67.9 99.2 129.4 154.8 177.2
10,400 68.5 100.2 130.7 156.3 178.9
10,500 69.2 101.1 131.9 157.8 180.7
10,600 69.8 102.1 133.2 159.3 182.4
10,700 70.5 103.1 134.5 160.8 184.1
10,800 71.2 104.0 135.7 162.3 185.8
10,900 71.8 105.0 137.0 163.8 187.5
11,000 72.5 105.9 138.2 165.4 189.3
11,100 73.1 106.9 139.5 166.9 191.0
02 GSF1200S

Offline Bob Holland

  • Board Homesteader!
  • ***
  • Posts: 510
How fast......again
« Reply #27 on: November 13, 2005, 03:42:02 PM »
On the gearing caclulator, you input sprocket size and tire diameter. I will send it to anyone who wants it. I have one for the Busa and ZX12.
I have found it easier to meaure the circumference of the rear tire and then find the diameter. I have checked this aginst my gps and it is acurate

 INPUTS     1998 GSF1200S Bandit Gearing Calculator        
Front Sprocket (Teeth)  15          
Rear Sprocket (Teeth)   43          
Final Ratio   2.87          
Primary Ratio 1.565          
Rear Tire Diameter (inches)   24.79          
Tire Circumference (Inches)  77.88          
GEAR 1  2  3  4  5
Internal Gear Ratio   2.384 1.631 1.250 1.045 0.913
Overall Gear Ratio   10.695   7.317 5.608 4.688 4.096
 RPM  MPH   MPH   MPH   MPH   MPH
If I didn't have a Suzuki, I would have a Kawasaki

Offline Red01

  • Board Homesteader!
  • ***
  • Posts: 8977
  • Are we having fun yet?
How fast......again
« Reply #28 on: November 14, 2005, 01:56:00 AM »
If you wanna get technical, there's a problem with that formula... it shouldn't be "diameter" (or the diameter calculated from the circumference) but "effective diameter" which is 2X the radius from the center of the axle to the ground (contact patch). This measurement will be smaller than the radius taken from the axle to the top of the tire - unless the wheel is WAY overinflated or has no weight on it.

The posted charts are gonna be close, but if you want exact, you'd need to feed the calculator "effective diameter."

OK, I'm done pickin' the fly dung from the pepper...   :motorsmile:
Paul
2001 GSF1200S
(04/2001-03/2012)
2010 Concours 14ABS
(07/2010-current)


Offline Bob Holland

  • Board Homesteader!
  • ***
  • Posts: 510
How fast......again
« Reply #29 on: November 14, 2005, 09:30:20 AM »
In fact, the faster you go, the bigger the tire gets, so mesure it any way you like, it will be a lot closer than the speedo
If I didn't have a Suzuki, I would have a Kawasaki