Bandit Alley
GENERAL MOTORCYCLE FORUMS => GENERAL MOTORCYCLE => Topic started by: solman on June 09, 2007, 01:24:46 AM
-
I took my 03 B12 to emmsions for the first time and it failed! it was fine for hyrdocarbons, but failed the carbon monoxide. I was so pissed! :taz: I know of a few things that I could do to help it out, but the idea upsets me and it is a guess game if I do enough to fix the problem. I sure as hell ain't going to pay a stealer to fix/break it.
-
I can't believe you have to pass emmissions on a bike. That sucks. :duh:
-
Wow... are you running the stock exhaust, or aftermarket stuff? :shock:
-
In AZ, depending on where you live, you have to do emmisions. It does suck too. I have a holeshot pipe and jet kit. It also has the pair valve blocked. I will have to do some stuff this weekend and try again Monday. I think max on carbon monoxide was 5.50 and I was 8.35. Hopefully a few changes will fix the problem.
-
Lucky for me, Pa. doesn't have emmision test for bikes.
-
AFAIK, AZ is the only one.
Not even the emissions nazis of CA test m/c's.
In WA, they test emissions, or not, depending on where you live, too... but WA doesn't test m/c's.
-
Yeah, I failed emissions too with the B4 and it took me forever to get the bike into good running order. Ran great when I opened the throttle, but had an idle miss that caused me to fail on the hydrocarbons (only at idle).
So for the few months the bike was out of commission, I commuted with the 15mpg mustang instead of the 42 mpg bike! :annoy: Good work on saving the environment Arizona! :clap:
I suppose in the long run, it worked out ok because it never did idle well. And I got to learn how to rebuild the Mikunis, balance them, remove/replace them after turning air/fuel screws a half dozen times or so...Hehe. Just chapped my hide a little, cause it only failed at idle, and 90% of my commute is on the freeway...not to mention the fact that it's a freaking 400cc motorcycle! :roll:
OK, done ranting. Good luck on getting it all sorted out Solman!
-
I got it to pass emmissions yesterday!!!! :grin: I changed my air filter which was ready to be changed anyways. I also changed the oil and unblocked my pair valve hose. Max was 5.5 for carbon monoxide and I got 4.88. Good enough for me! So Monday I will go to the DMV to get my tags swapped over to AZ.
-
In AZ, depending on where you live, you have to do emmisions. It does suck too. I have a holeshot pipe and jet kit. It also has the pair valve blocked. I will have to do some stuff this weekend and try again Monday. I think max on carbon monoxide was 5.50 and I was 8.35. Hopefully a few changes will fix the problem.
I would guarentee that you will not pass any emissions test with a jet kit & the pair system blocked. This is the reason your bike was like it was at stock. (Lean) It is also the reason they are not making the air cooled B-12 anymore.
-
I'll wager he passes..hehe.
-
I'll wager he passes..hehe.
I got it to pass emmissions yesterday!!!!
Yes, I did!