Bandit Alley

GENERAL MOTORCYCLE FORUMS => GENERAL MOTORCYCLE => Topic started by: Diskbrake on November 10, 2005, 04:45:21 PM

Title: HIT AND RUN
Post by: Diskbrake on November 10, 2005, 04:45:21 PM

As the title suggests  :rant2:

The phucker bent my Leo vince SBK carbonfiber can.

I was on my way to college and stopped at a juction an this prick in a MG rear ended me into the middle of the road where i nearly got hit by a van and then sped off.

I need a new exhaust, slip-on not a full system and am really pissed off so i want to get the loudest one possible to piss everyone else off.

Title: HIT AND RUN
Post by: Diskbrake on November 10, 2005, 04:55:23 PM

Heres a pic my SBK. (before the hit)

(http://www.bikepics.com/pics/pics/suzuki-gsf600-99-bikepics-464165.jpg)

Title: HIT AND RUN
Post by: Red01 on November 10, 2005, 07:01:45 PM

Hunt him down and  :gatlin

Title: HIT AND RUN
Post by: zeebandit on November 10, 2005, 07:37:14 PM

Glad you're OK physically. Nice looking Bandit. :beers:

Title: HIT AND RUN
Post by: PeteSC on November 10, 2005, 08:38:36 PM

Will Leo Vince reskin the can for you?

Title: HIT AND RUN
Post by: Diskbrake on November 10, 2005, 08:40:29 PM

Thanks on the nice bandit comment

I need to know what exhaust to get next........... what is the best or loudest :wink:

Title: HIT AND RUN
Post by: Diskbrake on November 10, 2005, 08:43:06 PM

When you say 'reskin' do you mean the carbon fibre because the whole end can is bent.

Title: HIT AND RUN
Post by: chevsuz12 on November 11, 2005, 01:07:28 AM

Hopefully you got his plates!  Glad you weren't hurt.  I hope you hunt that mother F'r down and punch him in his throat  as hard as you possibly can!  Then get the biggest truck you can find and run over his piece of shit car.  Not to give you any ideas or anything. :stickpoke:

By the way, D&D would be the loudest.

Title: HIT AND RUN
Post by: WEINERDOGBONE on November 11, 2005, 10:57:38 AM

Beautiful Bandit! What goes around comes around. That prick will get his even if you never see him. Wicked behavior always catches up to you eventually.

Title: HIT AND RUN
Post by: Lmario on November 11, 2005, 11:13:29 AM

Get a Yoshimura on the 600, best "howler" I've ever heard on a bandit.
Until 4000rpm not that loud, but beyond that point,.......hell breaks loose!

 :scaredmouse:

Title: HIT AND RUN
Post by: Diskbrake on November 11, 2005, 06:01:18 PM

Do they do a yoshimura for the 600 bandit because i cant find one on the net.

Title: HIT AND RUN
Post by: Red01 on November 11, 2005, 07:28:41 PM

Just get one for a 2001+ B12. I don't believe Yosh lists the B6, but their 2G can comes with a mid-pipe and fits all the B6's.
(The Yosh 1G cans are bolt-ons, not slip-ons, so won't fit a B6 unless you use a 1G B12 OEM mid-pipe.)

Title: loud pipes
Post by: Snubnose on November 11, 2005, 09:53:07 PM

Dale walkers 17"( louder) 14"(loudest) holeshot( www.holeshot.com) comp 2 or
D & D, I hear has THE loudest. call them to inquire. see ebay link...

http://cgi.ebay.com/ebaymotors/NEW-SUZUKI-GSF-600-BANDIT-D-D-CHROME-CARBON-EXHAUST_W0QQcmdZViewItemQQcategoryZ35596QQitemZ4565322787QQtcZphoto

or Scorpion?...http://cgi.ebay.com/ebaymotors/NEW-SUZUKI-GSF-600-BANDIT-SCORPION-CARBON-FIBER-EXHAUST_W0QQcmdZViewItemQQcategoryZ35596QQitemZ4549866314QQtcZphoto...or

HINDLE makes a good one too...http://cgi.ebay.com/ebaymotors/NEW-SUZUKI-GSF-600-BANDIT-SUPERSPORT-ALUMINUM-EXHAUST_W0QQcmdZViewItemQQcategoryZ35596QQitemZ2497713077QQtcZphoto

Title: HIT AND RUN
Post by: FrankB12 on November 11, 2005, 11:25:50 PM

I love the Yoshimura RS-3 Race Baffle on my 1200.  However, here in the U.S., the D&D exhaust seems to have the reputation as the LOUDEST.  Not sure if you can get that over the pond.  

By the way, how are the laws in the UK regarding exhausts?  I'm curious if the police "look the other way".  Here, they are pretty relaxed about the whole issue.

Title: HIT AND RUN
Post by: Red01 on November 11, 2005, 11:58:37 PM

I couldn't tell you how tightly they enforce it in the UK since I've never even been there, but I do know they have db
standards for aftermarket cans and to be "road legal" such cans have to have a "BSAU" mark of approval.

I'll bet D&D cans don't carry the stamp.  :wink:

Title: HIT AND RUN
Post by: chupacabra on November 12, 2005, 03:35:43 AM

Take your can off and run with just your mid pipe, its free. When the police stop you tell them some prick in a MG was seen with it stuck in his . . . where ever you want .  :duh:    :beers:    :bigok:

Title: HIT AND RUN
Post by: Diskbrake on November 12, 2005, 05:56:36 PM

Yeah the laws here are qiute tight :sad:
If i got a D&D i would have to buy a standard can to pass the MOT which will only cost £20. The yoshi and the Scorpion are sold widely over here so they will be marked  :wink: .

Now i know what the loudest exhausts are mabye i could take up a bit more of your time and ask what is the best looking/biggest.  :grin:

And i have had a proper look at my Leo vince and the pipe is bent a little and cant be fixed.......... so i have to get a new one :sad:

Title: HIT AND RUN
Post by: Red01 on November 14, 2005, 01:26:31 AM

The stock can is probably the biggest.  :grin:
As far as what looks the best? That's up to you! What I like, you may hate.