Author Topic: Home Made Front stand  (Read 5699 times)

Offline stormi

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 2801
  • BOFH
    • stormi's other hobbies
Home Made Front stand
« on: May 31, 2006, 01:42:36 PM »
Ok.. I could swear I read this here, but since I can't find it anywhere with any of the search words I've used, here it goes.

Orginal link

I found a link to this somewhere, and since the 919 needs a front tire, and since I don't have a centrestand on it, we built this.  

It's pretty sturdy, don't push on it if it's not loaded, but it's holding the bike securely right now.   The parts may be $48 in the states, but here we get bent over for $90 in parts, but since it will save me about $40 on the first tire change, and it can be used for all 4 of our bikes, it should pay for itself quickly.

This is ours, with the 919 "hanging" from it
 

I put the motocycle lift under the forks for the night, for my own peace of mind.  I had terrible visions of the carnage that would happen if the bike managed to fall.  Squished Dita, Bashed up 919, and somehow, I know that the dirtbikes ( behind me in this pic) would get into the action as well.

Quote
Shopping List:
Qty    Part Description    Where Used    
4    8" x 1" pipe    Feet
4    24" x 1" pipe    Vertical Legs
4    1" Tee    2 for Top Bar, 2 for Legs to Feet
2    1" 90 degree Elbows    Vertical Legs to Top Bar
2    4" x 1" pipe    Connect Elbow to Tee on top bar
4    1" Caps    End of Feet
2    1" Connectors    Connect  two 24" pipes to make vertial legs
1    30" x 1" pipe    Top bar

 
« Last Edit: August 06, 2010, 04:17:30 PM by stormi »
stormi

Dita - 91 Bandit 400 - SOLD
Blue - 02 Hornet 919 - Perfect Gentleman
02 KTM 200 EXC - Sold
08 VFR800 - Lowered 1.2"
17 KTM RC390
17 Husky TC85 converted to 105

Electrosport Charging System Test - it really works

Offline smooth operator

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1035
Home Made Front stand
« Reply #1 on: May 31, 2006, 02:09:14 PM »
That will work.I have had stands made for my Bandit front and back. The front has pegs that fit in the bottom of the forks but they could be a better fit. Wants to slip out if not just right. But once its up its stable.

Offline Bob Holland

  • Board Homesteader!
  • ***
  • Posts: 510
Home Made Front stand
« Reply #2 on: May 31, 2006, 02:49:51 PM »
In my garage, I have two eye bolts in the ceiling, and with my come along, I can lift the front or rear, or both if need. I have a set of forks that have been shorten 3" for dragracing, so it required a easy way to lift the front.
If I didn't have a Suzuki, I would have a Kawasaki

Offline stormi

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 2801
  • BOFH
    • stormi's other hobbies
Home Made Front stand
« Reply #3 on: May 31, 2006, 09:10:41 PM »
Quote
In my garage, I have two eye bolts in the ceiling, and with my come along, I can lift the front or rear, or both if need. I have a set of forks that have been shorten 3" for dragracing, so it required a easy way to lift the front.


we considered something along the same lines, but given that we don't have a garage, just a shed that's built with 1x4 framing :duh: ,.. it seemed that stand alone might be the way to go.  :shock:
stormi

Dita - 91 Bandit 400 - SOLD
Blue - 02 Hornet 919 - Perfect Gentleman
02 KTM 200 EXC - Sold
08 VFR800 - Lowered 1.2"
17 KTM RC390
17 Husky TC85 converted to 105

Electrosport Charging System Test - it really works

Offline GETFURIOUS

  • CAPS LOCK IS STUCK
  • Board Homesteader!
  • ***
  • Posts: 181
Re: Home Made Front stand
« Reply #4 on: June 04, 2006, 12:08:59 AM »
Quote
"stormi" Ok.. I could swear I read this here, but since I can't find it anywhere with any of the search words I've used, here it goes.

Orginal link

I found a link to this somewhere, and since the 919 needs a front tire, and since I don't have a centrestand on it, we built this.  

It's pretty sturdy, don't push on it if it's not loaded, but it's holding the bike securely right now.   The parts may be $48 in the states, but here we get bent over for $90 in parts, but since it will save me about $40 on the first tire change, and it can be used for all 4 of our bikes, it should pay for itself quickly.

This is ours, with the 919 "hanging" from it
 

I put the motocycle lift under the forks for the night, for my own piece of mind.  I had terrible visions of the carnage that would happen if the bike managed to fall.  Squished Dita, Bashed up 919, and somehow, I know that the dirtbikes ( behind me in this pic) would get into the action as well.


OKAY.....I JUST GOTTA BUILD ONE (TWO, THREE, FOUR) OF THESE!....

WOW.....THANKS FOR THE INFORMATION..... :banana:
2001 BANDIT 1200S - MY DOCTOR ALWAYS SAYS, TAKE A SHOT OF B-12 AND CALL ME IN THE MORNING!  I LOVE MY DOCTOR!

W-T-B - AFTERMARKET CHROME/POLISHED WHEELS-LIKE THESE-http://www.exoticsportbike.com/star2.htm

Offline android12

  • TURBO TYPER!
  • **
  • Posts: 49
Re: Home Made Front stand
« Reply #5 on: August 05, 2010, 09:38:26 PM »
Im replacing my front, cant u just put on center stand and weight down the back side?? I guess the engine is the heavier part of the bike, but it cant be that heavy?
'03 b12s Holeshot 17" comp 1 slip on, 5 deg timing adv, and stage 1 jet kit
'06 Ford Ranger 4x4 XLT

Offline scorpionsf

  • TURBO TYPER!
  • **
  • Posts: 41
Re: Home Made Front stand
« Reply #6 on: August 05, 2010, 10:27:36 PM »
Im replacing my front, cant u just put on center stand and weight down the back side?? I guess the engine is the heavier part of the bike, but it cant be that heavy?
thats how my friend and i worked on his '75 cb550 fork. we put it up on the center stand and ratchet strapped the swingarm to a big rock

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
Re: Home Made Front stand
« Reply #7 on: August 06, 2010, 08:48:44 AM »
Im replacing my front, cant u just put on center stand and weight down the back side?? I guess the engine is the heavier part of the bike, but it cant be that heavy?

Yup. If you have a center stand you jack up the front with a cinder brick and some bits of 2 x 4. Just make sure it's not resting on your exhaust pipe.

Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline stormi

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 2801
  • BOFH
    • stormi's other hobbies
Re: Home Made Front stand
« Reply #8 on: August 06, 2010, 04:10:20 PM »
Absolutely it works to do that, if you have a centerstand.  The 919 doesn't, so we needed something else.  I also feel more secure having the bike suspended for things like fork work.  When r_outsider was doing the fork seals on the CBR600 we had a few years back, we used the same stand.  A lot of sport bikes (Gixxers, CBRs, etc) have no centerstands.  Of course sometimes people also take them off for other reasons too.
« Last Edit: August 06, 2010, 04:14:26 PM by stormi »
stormi

Dita - 91 Bandit 400 - SOLD
Blue - 02 Hornet 919 - Perfect Gentleman
02 KTM 200 EXC - Sold
08 VFR800 - Lowered 1.2"
17 KTM RC390
17 Husky TC85 converted to 105

Electrosport Charging System Test - it really works