Author Topic: Ignition Question  (Read 4303 times)

Offline CrustyOreo

  • Board Regular!
  • **
  • Posts: 14
Ignition Question
« on: April 06, 2014, 06:09:11 PM »
My little 400 has no spark, I pulled a spark lead from each coil and tested it with no results.
 I tested for 12V at the coil from the harness side with key on and there's nothing  :stickpoke: Should be voltage here? I tried cranking the bike over and still read 0V on the meter.
I checked resistance in the coil on where the bike harness connects and there was continuity

What else can I check?

Thanks

Offline CrustyOreo

  • Board Regular!
  • **
  • Posts: 14
Re: Ignition Question
« Reply #1 on: April 06, 2014, 06:28:18 PM »
Welp disregard this. The wires are broken where they come out of the left side cover for the pulse generator  :duh:
Seems it's been repaired before and there isn't enough wire. Anyone stateside have a spare?