Author Topic: Service manual  (Read 11669 times)

Offline Metalliman

  • New user!
  • *
  • Posts: 3
Service manual
« on: September 10, 2014, 12:04:39 AM »
Hi all, I'm a complete noob and I have just bought my first bike, a '94 gsf250 bandit. It's a bit of a fixer upper and I'm sure this question has been asked before but here goes... Does anyone know of a link or somewhere that I can download a service manual for a 250 bandit? I have searched online and through this forum. there are some links on old threads but nothing seems to work....
Any help would be greatly appreciated :)
Thanks

Offline ventYl

  • Board Homesteader!
  • ***
  • Posts: 249
Re: Service manual
« Reply #1 on: September 10, 2014, 08:21:09 AM »
recently, there was a thread about GSF250 carbs. try to PM the user who posted carb blueprints. maybe he has some manual and the blueprints were not from some online spare parts website.
Bandit 400 1991 - stock except of swap from GK75B to GK75A

Offline t6nis

  • Board Homesteader!
  • ***
  • Posts: 61
Re: Service manual
« Reply #2 on: September 10, 2014, 04:55:57 PM »

Offline Metalliman

  • New user!
  • *
  • Posts: 3
Re: Service manual
« Reply #3 on: September 10, 2014, 06:50:07 PM »
Thanks, synapse has some good info :) I'm still after diagrams etc though so I'll keep searching. Will look for the thread on carbs :thanks:

Offline shidoran

  • TURBO TYPER!
  • **
  • Posts: 20
Re: Service manual
« Reply #4 on: October 23, 2014, 06:57:52 AM »
I've got part of the GJ73A manual and the GJ72A manual but if yours is a '94 you've probably got the 74A engine...?

Offline Metalliman

  • New user!
  • *
  • Posts: 3
Re: Service manual
« Reply #5 on: October 23, 2014, 08:47:08 PM »
Thanks Shidoran, I do indeed have the gj74a. I'm not sure what the differences are between the 72 73 and 74a but it couldn't hurt to take a look. In which format do you have them?

Offline shidoran

  • TURBO TYPER!
  • **
  • Posts: 20
Re: Service manual
« Reply #6 on: October 24, 2014, 07:16:55 PM »
All in pdf.

I've also just done the rings and pistons on mine so if you need any advice it's fresh in my head lol.