Author Topic: bandti 400v wont rev past 11800  (Read 13629 times)

Offline niclyg

  • New user!
  • *
  • Posts: 6
bandti 400v wont rev past 11800
« on: July 01, 2016, 07:21:51 AM »
Hi i have a bandit 400v 1993 i think, it will not rev above 11800 -12000. in all gears do the some think. it is like something stops the bike there.

Thanks in advance
Nikos

Offline Squishy

  • Board Homesteader!
  • ***
  • Posts: 417
Re: bandti 400v wont rev past 11800
« Reply #1 on: July 01, 2016, 07:40:19 AM »
- VVC problem. Check manual.
- Dirty airfilter

Offline T2098

  • TURBO TYPER!
  • **
  • Posts: 28
Re: bandti 400v wont rev past 11800
« Reply #2 on: July 05, 2016, 08:13:46 PM »
I've got the same problem on mine, and I haven't quite managed to figure it out yet.  11,800rpm corresponds to exactly 180km/hr in 6th gear - the CDI is supposed to have a lower rev limit in 6th to comply with the japanese 180km/hr restriction.   However on mine, no matter what I do, even if I attempt the 'desestrict' mod, the bike hits the rev limit at 11,800rpm in all gears.   

In essence, the CDI thinks the bike is in 6th gear all the time, even when it isn't.   I even swapped for another OEM Suzuki 1991 VC-specific CDI and it does the same thing.

The only thing that got me past the 11,800rpm rev limit was buying an aftermarket 'derestrict' CDI box which ignores the rev limit in all gears, but unfortunately the timing curve in it gives me less power and makes the bike harder to start so I don't want to keep it in there.

Maybe i'll poke at it a bit more this weekend to see if I can figure out why, but I would start by looking at the wiring from the transmission to the CDI for the gear sensor.

Offline Squishy

  • Board Homesteader!
  • ***
  • Posts: 417
Re: bandti 400v wont rev past 11800
« Reply #3 on: July 06, 2016, 04:42:01 AM »
I've got the same problem on mine, and I haven't quite managed to figure it out yet.  11,800rpm corresponds to exactly 180km/hr in 6th gear - the CDI is supposed to have a lower rev limit in 6th to comply with the japanese 180km/hr restriction.   However on mine, no matter what I do, even if I attempt the 'desestrict' mod, the bike hits the rev limit at 11,800rpm in all gears.   

In essence, the CDI thinks the bike is in 6th gear all the time, even when it isn't.   I even swapped for another OEM Suzuki 1991 VC-specific CDI and it does the same thing.

The only thing that got me past the 11,800rpm rev limit was buying an aftermarket 'derestrict' CDI box which ignores the rev limit in all gears, but unfortunately the timing curve in it gives me less power and makes the bike harder to start so I don't want to keep it in there.

Maybe i'll poke at it a bit more this weekend to see if I can figure out why, but I would start by looking at the wiring from the transmission to the CDI for the gear sensor.
If you have a resctriction on the OEM CDI there is a green/yellow wire going from the CDI to the gear selector

Look here

http://forums.banditalley.net/index.php?topic=11897.0