Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: yuckhil on February 21, 2021, 01:34:16 AM

Title: 13374-35C00 O-RING, FLOAT VALVE ASSY SEAT
Post by: yuckhil on February 21, 2021, 01:34:16 AM

I bought genuine Suzuki parts to rebuild the carbs, and the o-ring for the float valve assembly seat seems to be larger than the one already installed.  The Suzuki dealership ordered another set from Suzuki for me, and they are the same size as the first batch.

My customer record at the shop shows I purchased the same part number six years ago, and the parts I received then are currently installed on the assembly, see the attached photo.

The part number seems to be correct as item #21 in the parts list.
http://www.mickhone.com.au/partFinder/fiche/suzuki/2000/gsf250v/carburetor

The photos in this ad seem to be the same size, compared to the bar code printed on the sachet.
https://www.ebay.com.au/itm/202722106367

I am reluctant to cut off the currently installed o-rings in case the new ones are too large to reassemble the float valves.

Any ideas?  Thanks.

Title: Re: 13374-35C00 O-RING, FLOAT VALVE ASSY SEAT
Post by: TJS on September 27, 2021, 01:44:23 PM

Looks wrong to me too! Try Litek.