Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: siraig on August 19, 2011, 06:55:27 PM

Title: 1991 bandit 400 partout...
Post by: siraig on August 19, 2011, 06:55:27 PM

time to move on to a different bike... though i.love my bandit  looking to.part it all out.  pm me or post tellin me what you're looking for..

thanks

Title: Re: 1991 bandit 400 partout...
Post by: 400banditman on August 20, 2011, 11:23:27 AM

need a front fender (crack free) and a rear brake disc thats not warped or under spec...

Title: Re: 1991 bandit 400 partout...
Post by: siraig on August 20, 2011, 12:02:35 PM

ill round the hardwear for cracks on the fender, but none that ive noticed the past 6months. what does the disk need to measure to be in spec? my dads a mahinest so i can get an accurate measurement

Title: Re: 1991 bandit 400 partout...
Post by: 400banditman on August 20, 2011, 12:12:34 PM

0.240 +/-0.008 is what the manual calls out for thickness of the rear. Mines warped and I can feel it when i brake...it sucks, LOL

Title: Re: 1991 bandit 400 partout...
Post by: siraig on August 20, 2011, 01:12:24 PM

ill throw a set of calipers on it tonight. front and rear.

i would prefer to keep the r brake together as a whole...but ill be getting desprite in a few weeks

Title: Re: 1991 bandit 400 partout...
Post by: gixxerjasen on August 21, 2011, 11:38:59 AM

Where are you located sirag?

I'd be possibly interested in the rear brake reservoir and an air box.

Title: Re: 1991 bandit 400 partout...
Post by: siraig on August 23, 2011, 11:51:43 PM

Located in central PA

Motor runs well.  Carbs leak gas but run great. Good cdi too. Forks are straight. Etc

Title: Re: 1991 bandit 400 partout...
Post by: 400banditman on August 24, 2011, 12:41:54 AM

Harrisburg holla!

Title: Re: 1991 bandit 400 partout...
Post by: siraig on August 24, 2011, 08:44:03 AM

State college here

Title: Re: 1991 bandit 400 partout...
Post by: JTOWN03 on August 25, 2011, 01:30:39 PM

Can you confirm the ignition module PN? Would be interested in for a spare.
Thx

Title: Re: 1991 bandit 400 partout...
Post by: nos on August 29, 2011, 05:32:20 PM

swing arm + radiator + shipping
possible?

Title: Re: 1991 bandit 400 partout...
Post by: HD on September 28, 2011, 04:33:38 PM

Have you got any of these?

Front tyre, speedo cable, ignition barrel, rhs switchgear, gear linkage, rear disc, chain, riders seat, shock, rectifier, battery, clutch cable, LHS switchgear & RHS switchgear if they are black with all writing still on, peg hanger plate things, dark black/not faded rider and pillion seat.

Probably better to pm me cos I always forget to check here :lol:

Or email hlolh7@hotmail.com if you like :up: