Author Topic: jays cam mod  (Read 2750 times)

bsodders

  • Guest
jays cam mod
« on: October 09, 2011, 03:23:36 PM »
I couldn't find the original post for Jays cam mod.  Ist it an intake came in the exhaust side?  Thanks.   Has anyone tried the gsxr cam swap?


Thanks again

Offline Chris H

  • Board Homesteader!
  • ***
  • Posts: 559
Re: jays cam mod
« Reply #1 on: October 09, 2011, 06:07:13 PM »
Only gk73a cams will fit in a B4, gk76a are different diameter. B4 and Gk73a share the same exhaust cam (pre 93) and slightly different inlet. I'd be supprised if swopping the cam would make a big difference, more lift will help up top, but inlet's is where the most power is at, for example the 1st gen vvc bandit had variable inlet and exhaust cams but the 2nd gen only had inlet as the power was as good.

bsodders

  • Guest
Re: jays cam mod
« Reply #2 on: October 09, 2011, 07:14:58 PM »
Thanks,  just trying to sort through all the fuzz for some top end power.


B

bsodders

  • Guest
Re: jays cam mod
« Reply #3 on: October 15, 2011, 06:23:19 PM »
So, has anyone tried Jays cam swap, or can anyone track down the data on it?

Actual GSXR cam swap.....

And while I'm at it, what's the diff between gsxr and b4 trans.?

Thanks

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Re: jays cam mod
« Reply #4 on: December 13, 2011, 11:15:43 PM »
And while I'm at it, what's the diff between gsxr and b4 trans.?

some are close ratio...tall first second then rest shift like butter never out of the power, less of a drop in rpms. I own maybe 2-3 of these trans and will put them on ebay soon dont need them any more.
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol