Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: mattylees46 on October 02, 2006, 03:18:45 PM
-
Ive just bought myself a cheap bandit 12 rear shock off ebay for £20, its hardly been used and is from the '96-00 model.
Basically my rear shock is pretty much dead, so I'm considering replacing it with the bandit 12 shock. Anyone had any experience of fitting a B12 shock to a bandit 400 or have any idea how well it would work? I wouldnt mind getting a bit more ride height too as my bike sits too low for my liking, would it raise the rear at all?
Thanks in advance for the help
:thanks:
-
only one i have tried that raised the rear just a bit and worked good was a rf 900 rear shock
cheers
Jay
-
IIRC the first gen B12 shock will be too long. I had a 2nd gen on mine and it was a big improvement. It raised the rear a decent amount. I'm pretty sure the 1st gen is considerably longer. Check throught the FAQ. I think they're listed in there.
-
Thanks for the help guys, really appreciate it :thanks:
Ive just done a search as you mentioned Pitter and it turns out the '96-00 B12 shock is actually a bit shorter than the '01- B12 shock and a few people have actually fitted one with positive results, so I'm a happy man :grin:
I tried measuring the shock and I make it to be about 325mm, does this sound like it will work?
Thanks again for all the help :beers:
-
Check this (http://forums.banditalley.net/viewtopic.php?t=524&sid=ba1834fe41cf82d05ee76b51d55b1571) thread. I knew there was an issue with the 1G B12 shock - it's SHORTER than the B4 shock and will LOWER the ride height. Measuring from the center of the eyes, the B4 is ~305mm and the 1G B12 is ~300.
-
only one i have tried that raised the rear just a bit and worked good was a rf 900 rear shock
cheers
Jay
If it raises the rear any it's a very little bit. Didn't really notice the increase when I installed mine. Now I have a progressive so I may have a 900 shock for sale on the cheap some time.