Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: gsxr400 racer on August 27, 2006, 12:32:11 PM

Title: bandit 400/600 have 41mm forks tubes?
Post by: gsxr400 racer on August 27, 2006, 12:32:11 PM: so if bandit has 41 mm fork tubes and a bandit 600 has 41 mm fork tubes they should slide right into your triple tree, maybe new front end for some?
Title: bandit 400/600 have 41mm forks tubes?
Post by: BrianM on August 27, 2006, 09:15:21 PM: Yeah, but why? Honda F2/F3/VTR1000(superhawk)/VFR and a few others all have 41mm forks too, most of those with cartridges. It all goes back to that basic thought of Why change the forks if you're not going to upgrade them to cartridge? Dual disc breaks aren't enough reason for me (and are actually undesireable ~ I like stealth mods)

I'm hunting a cheap pair of F3 or VTR forks as they have external rebound adjustment but no compression (pistons are built different to compensate) that I'm going to put into the B4 lower legs. I want to keep the OEM appearance but get better suspension performance.
Title: bandit 400/600 have 41mm forks tubes?
Post by: gsxr400 racer on August 27, 2006, 10:23:10 PM: you go guy, :banana: Thats a brilliant idea. Thanks for the other list of 41mm forks, I was just giving a starting point for people but you have finished the list. Me i dont care cause if its not USD i dont want it!
cheers
let me know how you come along with the f2 cartriges!
Title: bandit 400/600 have 41mm forks tubes?
Post by: PitterB4 on August 27, 2006, 11:23:37 PM: Putting F3 internals in SV forks is a common mod so I guess it should work on a bandit. I like keeping the OEM look too... so I just bought the whole CBR. :monkeymoon:

I have to say - if I still had the B4, my next move would without a doubt be getting dual discs up front.
Title: bandit 400/600 have 41mm forks tubes?
Post by: El Dopa on August 29, 2006, 04:47:37 AM: Quick question sort of on topic.

How many front end bits are interchangable between the GSXR400 models with the inverted forks ('92 onwards?), and Bandit 400 models with 'rightway up' forks?

My 400V has braided lines and dual discs. At some point in the future, I'd quite like to swap the forks for USD forks. If all the other bits were interchangable (wheel, triples, discs, pads, lines, clipons), all I'd need to swap would be the forks.

Is this doable? Are these Bandit bits interchangable with the GSXR400?
Title: bandit 400/600 have 41mm forks tubes?
Post by: flint666 on August 29, 2006, 05:55:55 AM: El dopa

to swap out the front end you'd need (not a finite list just off the top of my head)

yokes top and bottom
clipons
some means of mounting your clocks and headlight
axel
brakes
wheel (and spacers)
disks

All OF IT

unless someone else knows different

Andy
Title: bandit 400/600 have 41mm forks tubes?
Post by: gsxr400 racer on August 29, 2006, 01:28:56 PM: wheel, brakes and disc's should be the same if you have the 4 pistons brakes
Title: bandit 400/600 have 41mm forks tubes?
Post by: PitterB4 on August 29, 2006, 02:03:42 PM: That's if you have a twin-disc B4.
Title: bandit 400/600 have 41mm forks tubes?
Post by: gsxr400 racer on August 29, 2006, 02:38:42 PM: Quote from: PitterB4
That's if you have a twin-disc B4.

yes sir , doesnt the twin disc have 4 pot clipers and the single disc one have 2 pot
Title: bandit 400/600 have 41mm forks tubes?
Post by: flint666 on August 29, 2006, 02:45:33 PM: I thought that the axel was fatter on the usd forks than on the b4 ?
Title: bandit 400/600 have 41mm forks tubes?
Post by: El Dopa on August 29, 2006, 05:48:19 PM: The 400V I have has twin discs - 2 pots each side, 4 in total.

I'm trying to work out which front end parts would be interchangeable with GSXR400 USD forks.
Title: bandit 400/600 have 41mm forks tubes?
Post by: Herr Tod on August 29, 2006, 06:07:00 PM: Probably none, maybe the brake calipers and discs if the discs have the same diameter as the GSXR400 ones.