Author Topic: bar end screw diameter (Read 3154 times)

dxuereb · « **on:** January 08, 2007, 08:22:08 AM »

Gents,

I came along some nice bar end mirrors on this site:

http://www.oberon-performance.co.uk/acatalog/Bar_End_Mirrors.html

Does anyone know how large the internal handelbar diameter of a GSF400N (1992) is?

Cheers!

Bartjan · « **Reply #1 on:** January 08, 2007, 08:31:39 AM »

i don't know the diameter, but i just removed my mirrors.

i've got a mirror in my helmet since saturday

works perfectly (but expensive) and the helmet is very silent

Stealth · « **Reply #2 on:** January 08, 2007, 07:58:50 PM »

is that real or are u bs'ing?

if its real, whats the name of the helmet? im interested

Red01 · « **Reply #3 on:** January 08, 2007, 10:52:04 PM »

It's a standard 7/8 inch bar. From reading the link, it would work fine on your (or any other size) Bandit.

Bartjan · « **Reply #4 on:** January 09, 2007, 02:15:04 AM »

its real, you could click on the link to find out the name of the helmet

Red01 · « **Reply #5 on:** January 09, 2007, 10:02:55 AM »

Not sure about your local regulatory requirements, but I have a strong feeling this helmet (or one of those rear view camera/video screens) wouldn't resolve you from the laws on the books we have in my state that require a mirror on the left & right of motorcycles.

Bartjan · « **Reply #6 on:** January 09, 2007, 11:58:39 AM »

same here.....
but the police doesn't pay much attention to it

gsxr400 racer · « **Reply #7 on:** January 09, 2007, 05:30:17 PM »

That would be great racing , LOL no im not letting you pass hahahaha!

dxuereb · « **Reply #8 on:** January 15, 2007, 08:07:38 AM »

Guys, Going back to : http://www.oberon-performance.co.uk/acatalog/Bar_End_Mirrors.html

Red01, thanks. However theirs an issue... 7/8inches equates to 22.2mm which is larger the largest size they have.

I contacted the company but they didn't answer me. I guess they don't know.

Someone told me to measure the screw of the bar end with a vernier caliper. I'll try that too and post feedback on the BBS.

Red01 · « **Reply #9 on:** January 16, 2007, 02:19:33 PM »

Keep in mind that 22.2mm is the OUTSIDE diameter, the inside will be less (obviously).