Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: Zhi on September 09, 2005, 12:57:29 AM

Title: BST32 Needle jets...
Post by: Zhi on September 09, 2005, 12:57:29 AM

Well, I think I have put it off long enough, so it is probably time for me to seriously hunker down and change the little buggers. With that said, has anyone successfully sourced out the needle jets for the 32 mm carbs?

Title: BST32 Needle jets...
Post by: Maniac on September 09, 2005, 08:34:40 AM

I have a nagging feeling that they are the same as the 32mm carbs on the GS500E, but I've not been able to confirm it...

You can get them through Bike Bandit, but prepared to wait.  :sad:

Title: BST32 Needle jets...
Post by: Zhi on September 09, 2005, 02:24:04 PM

Bike bandit has discontinued them. Also doesn't the GS500 use a couple of bst33 carbs?

Title: BST32 Needle jets...
Post by: Herr Tod on September 10, 2005, 11:50:46 AM

GS 500 has either 32 or 33 mm carbs. Depends on the model type.

Title: BST32 Needle jets...
Post by: Zhi on September 10, 2005, 12:23:30 PM

Ah. I guess just like th bandit. :beers:

Title: BST32 Needle jets...
Post by: Herr Tod on September 10, 2005, 12:31:40 PM

Kind of... the jetting is totally different as well, main jet is #130 for example.

Title: BST32 Needle jets...
Post by: Maniac on September 10, 2005, 12:51:57 PM

You could always put a jet kit in it...

http://www.factorypro.com/Prod_Pages/prods41.html

Title: BST32 Needle jets...
Post by: interfuse on September 11, 2005, 12:28:44 AM

Quote from: "Maniac"

You could always put a jet kit in it...

http://www.factorypro.com/Prod_Pages/prods41.html

Jet kits don't come with the needle jets... usually just the jet needles, springs, and mains. Suzuki has them listed as discontinued.

So if you want them your pretty much SOL.

Title: BST32 Needle jets...
Post by: Maniac on September 11, 2005, 03:18:20 AM

Oh, crap, you meant the jets not the needles...  :duh:

I always get those two mixed up.