Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: jodyvan on October 02, 2008, 03:52:17 AM
-
Hey guys,
I'm looking to replace a speedometer cable that got broken overnight by someone. it is for my 91 GSF400. A stock cable doesn't seem to work I have tried that. I have also tried to replace the entire gear drive on the forks and use a new cable. The cable that was broken has a square drive on one side and a tang drive on the other. It seems my shocks are too narrow to fit the new drive for some reason. It appears it is not stock.
If anyone has any ideas I would very much appreciate it...
Cheers!
-
I wonder if the dual-discers use a different drive and cable? You may have to source one from a boneyard overseas... :banghead:
-
What end broke off?
I know when I was in a pinch a couple of months ago because my cable broke, I simply silver-soldered it back together. The square end that goes into the wheel side had broken off so I pulled it from the drive, cleaned both ends well and soldered them back together.
I had ordered a new one but since the repaired one worked, I never bothered putting the new one in. This is over two years now.
-Randy
-
It got snapped half way up in the middle. The cable is bent and non functional. On top of that the tang post has been detached from the cable. It is all frayed and not fixable. Thanks for the input though.
Bone yard overseas? Really... :annoy: Any word on how I find one of those?
-
Go to the scrapper and compare your cable to that of an older katana... might be the same part.
-
Go to the scrapper and compare your cable to that of an older katana... might be the same part.
Oh! Good thought!
-
Anyone out there that could take off their speedo cable on a dual front disk and see if it has a tang at the wheel and square drive at the gauge?
Sure would love to hear that I'm not the only one on the planet with one..... At least someone that knows of a part I can buy to fit and make it work...
Cheers!
-
FWIW, I blew the actual mechanical speedo drive at the wheel of my B4, and just had my local shop order another one. I can't see why you can just order a new cable. Am I missing something here?
-
FWIW, I blew the actual mechanical speedo drive at the wheel of my B4, and just had my local shop order another one. I can't see why you can just order a new cable. Am I missing something here?
I did buy a new speedo drive for the front shock as well as a new cable. The new cable would not fit into the speedo drive on my bike as it has a square drive into the odometer and a tang drive into the speedo drive. The different is a nut type connection at the drive.
On the stock part that I ordered, the drive end of the new cable had a washer pressure fit end and a square end into the odometer. All fine and dandy you would think if I just bought a new speedo drive right? NO!!! The new speedo drive that I bought will not fit on my dual front disk bike. I have the Japanese VV model which seems to be very slightly different.
That is why I was hoping that someone else with a dual front disk model could check their speedo box and tell me what type of cable or even the model number of the speedo drive. I would be more then happy to buy the right one but I've wasted money on the parts already once that I thought were the right ones...
So in short... I did that exactly but they didn't fit. :grin:
And the saga continues... :banghead:
-
FWIW, I blew the actual mechanical speedo drive at the wheel of my B4, and just had my local shop order another one. I can't see why you can just order a new cable. Am I missing something here?
I did buy a new speedo drive for the front shock as well as a new cable. The new cable would not fit into the speedo drive on my bike as it has a square drive into the odometer and a tang drive into the speedo drive. The different is a nut type connection at the drive.
On the stock part that I ordered, the drive end of the new cable had a washer pressure fit end and a square end into the odometer. All fine and dandy you would think if I just bought a new speedo drive right? NO!!! The new speedo drive that I bought will not fit on my dual front disk bike. I have the Japanese VV model which seems to be very slightly different.
That is why I was hoping that someone else with a dual front disk model could check their speedo box and tell me what type of cable or even the model number of the speedo drive. I would be more then happy to buy the right one but I've wasted money on the parts already once that I thought were the right ones...
So in short... I did that exactly but they didn't fit. :grin:
And the saga continues... :banghead:
Yeah Vid - you missed the fact that he has an imported, dual-disc version. Like Mike said, check the fische on an older Kan-o-tuna or maybe a GS500....
-
The end of the cable on the Jap VV is as picture.
(http://i300.photobucket.com/albums/nn2/ChrisHank/cable.jpg)
-
There's a couple of wreckers in BC that could pull one from a Katana and maybe match it up over the phone. The other thing you could do is get in touch with Terrycable or Motion Pro and have one custom made. It's actually not as expensive as you think.
-
My jap model 400 has the screw on end not the push in type. Do you need the screw on type?
-
Ignore what i said about the cable the picture is single disc. Ive looked on my Jap Variable valve and its as you say. You can use a B6 cable.
(http://i300.photobucket.com/albums/nn2/ChrisHank/cable001.jpg)
This is a bandit600 cable and is one inch longer than the B4.
-
Ignore what i said about the cable the picture is single disc. Ive looked on my Jap Variable valve and its as you say. You can use a B6 cable.
(http://i300.photobucket.com/albums/nn2/ChrisHank/cable001.jpg)
This is a bandit600 cable and is one inch longer than the B4.
WHOA I lost internet for a bit... you guys rock!!! Thanks for the pictures! You are very correct it's not the push in type it's the B6 one. The tang looks a bit longer is that the part you say is 1" longer or is it the cable itself? Forgive the stupid question... :thanks: :thanks: :thanks: :thanks: :thanks: :thanks: :thanks: :thanks: :thanks:
-
My jap model 400 has the screw on end not the push in type. Do you need the screw on type?
yes Banditmax I do sir... :D Anyone have an idea of the best and quickest place to get one in Canada?
-
Ordered one up from the US so fingers crossed!!
Again I appreciate the help and feedback fellas! I'm a lacking in the knowledge department when it comes to bikes. Learning what I can...
THANKS SO MUCH!