Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: gsxr400 racer on June 14, 2005, 02:20:36 PM
-
sizes 28,32,34,35mm 1399.00 plus shipping . to my crib shipping is 15.00 im saving right now. :stickpoke:
-
Wowzers. 1400 US? I think I'll keep my CV's.
-
yes sir a big chunk of change for on the street , but for my race bike a must have these will work way better than my rs roundslides. Just put it out there to let peeps know that that kind of stuff is available for the b4 . and i found these through that contact of the KILLER B so thanks again to him.
-
That's so cool that he's been able to give you the hook-up on a lot of cool stuff. Keep letting us know what you find. :beers:
-
yes sir, im shooting for different exhaust systems next!
-
Who sells the flat-slides and who makes them?
-
So what are you going to do with your stock carbs?
-
Who sells the flat-slides and who makes them?
a importer pax something KILLER B got his rear sets from them . i assume they come from japan cause of the price they are mikuni tmr flatslides im getting 32mm ones all i know is they do not sell them in the states. but to me well worth it.
-
So what are you going to do with your stock carbs?
I havent had stock carbs for some while . i have mikuni rs round slides (smooth bores) racing carbs cuz this is what was available in the states carb parts warehouse sells them and does suddco. these will be going on my street custome b4 when it ever gets done. :beers:
-
http://www.pacmax.com
-
http://www.pacmax.com
Their site doesnt have anything for bandits that I saw. Unless I'm missing something?
-
see i had part number to thing that i was looking for in japan from a company called www.plotonline.com some how he was able to find what ever i emailed to him. I personally have never seen the PAX site i just emailed him! I can probably come up with exhaust part numbers for you guys and you can email him like the pipe SLOVEKING has NASSERT R tittanium ive seen that in my book, yosh ,and a few more odds and such :beers:
-
Pac Max is an importer, they only list the more popular stuff on their website, but if you can find something (like Jay said), he can probably get it to the states for you. With my rearsets, I emailed the company in Japan that makes them and they told me to contact Pac Max.
-
see i had part number to thing that i was looking for in japan from a company called www.plotonline.com some how he was able to find what ever i emailed to him. I personally have never seen the PAX site i just emailed him! I can probably come up with exhaust part numbers for you guys and you can email him like the pipe SLOVEKING has NASSERT R tittanium ive seen that in my book, yosh ,and a few more odds and such :beers:
What is this book your refering to? Where did you acquire it and how do I get a copy?
-
it is a motorcycle accersoies cataloge mines a bit old , i just accuried it in my time mines from 1999-2000 but heres there phone number and fax and email.
phone # 0566(36)0456
fax 0566(36)0515
email 2(some japanese leters i cant read) plot @tcp-ip.ne.jp
hope that helps :beers:
-
Mmmmm, that Nassert Titanium pipe is way cool, i remember seeing that on one of those japan sites :shock:
FYI, here is the link to the Spice rearsets/partnumber on the plot website
http://www.plotonline.com/products/spice/05suzuki.html
-
yes verey nice but SLOV beat me to it on ebay :beers:
-
bandit yosh duplex system #
all stainless 110-143-5001
stainless -ti can 110-143-5081
stainless-carbon can 110-143-5091
and thay make some for the 250 bandit to!
heres another company cald WR'S no fear wako's power
stainless -alum can 40-sa3402
stain-carbon 40-sc3402
they also make them fort a 250 diff part numbers!a company calded OVER makes one for the 250 too~
BEET nassert r
tittanium with carbon can 0270-s26-00
and they also make a tittanium pipe with carbon can for the 250
now i must get back to work im at lunch!
-
Found this page that has some Bandit V exhausts from Nassert also...I've translated it into english. I might look into this for my FZR400, hmmmm
Link to beet.co.jp (http://babelfish.altavista.com/babelfish/trurl_pagecontent?url=http%3A%2F%2Fwww.beet.co.jp%2Foutlet%2F&lp=ja_en)
-
Found this page that has some Bandit V exhausts from Nassert also...I've translated it into english. I might look into this for my FZR400, hmmmm
Link to beet.co.jp (http://babelfish.altavista.com/babelfish/trurl_pagecontent?url=http%3A%2F%2Fwww.beet.co.jp%2Foutlet%2F&lp=ja_en)
Due you need to get on the WWW.400GREYBIKE.CO.UK site you could dec that 400 out (rr swingarm, tons of stuff for the fzr) we built one at the shop that put out 90+hp
-
Has anyone ever tried making rearset adapter plates for their B4. I had a set on a old CBR I had once. Basically its a flat plate with holes drilled to match the existing rearset mounting location.One side gets mounted as a would mount the rearset. Then the other side of the plate is drilled to match whatever kind of rearset you want to use. In this case something easily available like gsxr rearsets.
Just a thought before I spend $400 on rearsets only to break them when the bike goes down.
Any thoughts?
-
no but had the same idea for my bike cause as of now i have only one set of gsxr 400 pegs and brackets but would like to convert some vortex rearsets to my bike! give it a wurl bro!
-
The only real issue is fabricating a longer shift rod. But this can be done by using the existing heim fittings on the ends of the existing shift road and getting a piece of all thread and cutting it to the proper length. Thats what I had done before.
Once I get the B4 home and tear into it that will be one of the things to try.