Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: banditmack on May 30, 2005, 04:26:38 PM

Title: FUEL SENSOR BUT NO GUAGE.
Post by: banditmack on May 30, 2005, 04:26:38 PM

I ride a 96 b4 bandit.  Underneath the tank is a fuel sensor with two wires coming out.  How do I connect a fuel gauge off another bike to this sensor so I can finally see how much fuel I have left in the tank.

Thanks

Title: FUEL SENSOR BUT NO GUAGE.
Post by: interfuse on May 30, 2005, 05:35:23 PM

Fuel guages are for wusses. I usually use the tripometer or I open up the gas cap and have a look see... failing that I run out of gas and switch to reserve. I know this doesn't answer your question... but it's an alternate solution.

Title: FUEL SENSOR BUT NO GUAGE.
Post by: banditmack on May 31, 2005, 03:03:49 PM

i'm just tired of doing all the things mentioned above.

Title: FUEL SENSOR BUT NO GUAGE.
Post by: Red01 on May 31, 2005, 04:36:46 PM

If you have all the tank components for the gauge, you just need to find out what resistance value it runs on and find a gauge that runs on the same values.