Author Topic: gsf400 parts list and prices  (Read 9551 times)

Offline suparobb

  • Board Regular!
  • **
  • Posts: 13
gsf400 parts list and prices
« Reply #15 on: May 09, 2005, 04:22:29 AM »
hey 400runner,

can you email back at rnnguyen@yahoo.com ?

im interested in a few specific parts if you have them, thanks!

Offline TheKillerB

  • Board Homesteader!
  • ***
  • Posts: 148
gsf400 parts list and prices
« Reply #16 on: May 09, 2005, 11:15:12 PM »
Well, looks like the regulator I got from you was toast.  I put a new battery in and the regulator from your old bike and got no charge from the regulator/rectifier, but there's juice coming from the alternator.  My old one charged the battery so high that when I took a reading of the batter a week later, it was at 13.22 volts.  Looks like my only avenue may be springing for a new one.

John

Offline 400runner

  • Board Homesteader!
  • ***
  • Posts: 86
rectifier
« Reply #17 on: May 10, 2005, 01:58:48 AM »
Hey KillerB,
  Have you tested the regulator. I know it was working when I took it off the bike. The bike had no electrical problems. It was the valve shaft the did the bike in.
 400runner

Offline TheKillerB

  • Board Homesteader!
  • ***
  • Posts: 148
Re: rectifier
« Reply #18 on: May 10, 2005, 02:09:42 AM »
Quote from: "400runner"
Hey KillerB,
  Have you tested the regulator. I know it was working when I took it off the bike. The bike had no electrical problems. It was the valve shaft the did the bike in.
 400runner


Only thing I can think of is to check the wires.  They were colored differently than my old regulator (mine had a red wire, black w/white tracer and three yellow.  This one had black w/red tracer, black w/white tracer and three black).  I put the red end clipped off of mine onto the black w/red tracer and the black w/white tracer from mine to the black w/white tracer.  I'll hold the units up next to each other and make sure that was how it was supposed to be.  I checked it with my meter and wasn't getting a resistance reading, but I'll take to my local shop and see if they can check it.  I know you wouldn't intentionally sell me a bum piece.  I'll let you know what I find out.

John

Offline jpax

  • New user!
  • *
  • Posts: 5
gsf400 parts list and prices
« Reply #19 on: May 10, 2005, 10:53:27 PM »
Hey just wondering if you have the coil assembly for ignition 2 and 3
Email me back at justinpaixao@hotmail.com
My project is almost complete

Offline TheKillerB

  • Board Homesteader!
  • ***
  • Posts: 148
gsf400 parts list and prices
« Reply #20 on: May 13, 2005, 11:18:14 PM »
Bit the bullet and bought a new regulator/rectifier, should have it in 6 days or so.  I was told by the shop that I took it to that they didn't have a good way to test it.  Rather than spending valuable time running all over God's green earth to figure it out, I decided to get a new one.  Hopefully I don't have to revisit this problem again for another 15 years or more.

Offline theman1740

  • New user!
  • *
  • Posts: 3
rear seat and rear footpegs w/bracket
« Reply #21 on: May 27, 2005, 02:34:00 PM »
Do you still have the rear seat witht he rear pegs with brackets?  email me at Theman1740@hotmail.com

Offline b4cruz

  • Board Homesteader!
  • ***
  • Posts: 273
emailed you for wiring harness
« Reply #22 on: May 28, 2005, 01:31:22 AM »
i was hoping to get the wiring harness
or maybe even just the head lamp connector
pm me or email me at fe2cruz@hotmail.com

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
gsf400 parts list and prices
« Reply #23 on: June 12, 2005, 12:10:44 AM »
did you get me check?
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline cdyer77

  • Board Homesteader!
  • ***
  • Posts: 79
gsf400 parts list and prices
« Reply #24 on: June 12, 2005, 10:42:40 PM »
I'll take the gas cap & igniton w/key if they are still available.

Let me know,

Thanks,
Chris
1990 Bandit 400 - Now Parting Out - What do you need???
1999 Honda VTR 1000 - SOLD
2001 GSXR 600 - Track Bike
Reduc #177
Team Pro Motion #177

Offline 400runner

  • Board Homesteader!
  • ***
  • Posts: 86
check for parts
« Reply #25 on: June 12, 2005, 10:46:23 PM »
Yes I received it on Saturday. I will deposit it on Monday, but I wont send the parts out untill the check clears. I am guessing that if it all goes well I will send the parts out by Thursday. You should have them in your hands a few days after that.
400runner

Offline cdyer77

  • Board Homesteader!
  • ***
  • Posts: 79
gsf400 parts list and prices
« Reply #26 on: June 13, 2005, 12:16:16 PM »
Please PM me again, I read it once and then went back to reply later and it was gone.

I p/u the bike this weekend, so I'll have a better idea of everything I need.

Thanks,
Chris
1990 Bandit 400 - Now Parting Out - What do you need???
1999 Honda VTR 1000 - SOLD
2001 GSXR 600 - Track Bike
Reduc #177
Team Pro Motion #177