Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: Bartjan on November 02, 2007, 09:36:06 AM

Title: gsxr400 swingarm £10
Post by: Bartjan on November 02, 2007, 09:36:06 AM
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=280168751781&ssPageName=ADME:B:SS:NL:1123
Title: Re: gsxr400 swingarm £10
Post by: kako on November 02, 2007, 02:07:47 PM
isnt that a gk76 swinger?? will it still fit the bandit?... *waits for jay*
Title: Re: gsxr400 swingarm £10
Post by: turbofb on November 03, 2007, 12:25:31 AM
Should fit up the same way as my SP swinger,which is the same unit except it has bracing.
The pivot point is a direct fit,as is the shock linkage.The width is about 1" more than the stock B4,so you need to make some changes back there.
The GSXR runs a bigger,hollow axle,so the bearings are different.I used a 1st gen SV650 rear axle and wheel with the B4 cush drive and it worked well, with only about 2-3mm needing to be shaved off the right side spacer.The B4 rear wheel would probably also work,although youll still need the SV650 rear axle.I wanted the wider SV wheel so my 160 rear tire would fit right,so I went all the way with it.You could also probably go with a GSXR 600/750 rear wheel and it would bolt right up since the bearings are the same,but I couldnt tell you if the chain alighnment would be OK.
Also,there is no mounting tab for the rear brake torque strut. Jay had one welded onto mine before delivery since it was an unknown/unknown at the time........

(http://img.photobucket.com/albums/v286/rentalguy/b4001.jpg)
Title: Re: gsxr400 swingarm £10
Post by: kako on November 03, 2007, 01:06:05 AM
 :stickpoke: errr turbo... your swinger is from a different generation of 400's.. yours is from a 88-90 ish..(gk 73a) where i believe that ebay one is a gk76.. which is 91 and up.. also it doesn't have to be an sp to be braced... well at lease i don't think it does as my bike is not the sp and has a braced swinger. but i think there is not a chance it will work.. i am just not sure.
Title: Re: gsxr400 swingarm £10
Post by: gsxr400 racer on November 03, 2007, 08:08:37 AM
89 73 has the same swinger as Kako's and turbo's sp or none its 89. As for the 76 swinger I have now idea as its a whole different frame but you know what they say anything fits if you have enough money.
Title: Re: gsxr400 swingarm £10
Post by: Red01 on November 08, 2007, 09:15:51 PM
but you know what they say anything fits if you have enough money.
Or fab skillz & toolz.  :bandit:
Title: Re: gsxr400 swingarm £10
Post by: kako on November 09, 2007, 12:27:47 PM
well... they did go to the water cool style frame for the gk76... and the water cooled gixxers singers fight right?? so i think there might be half a chance that this might fit... plus thats a not bad price.
Title: Re: gsxr400 swingarm £10
Post by: gsxr400 racer on November 10, 2007, 10:16:12 AM
yea thats a oil cooled water cooled frame style to add that! i believe the design for the srad and newer came from the 73 frame