Author Topic: Officially pissed at the project 400... (Read 3610 times)

Iyeager · « **on:** August 22, 2006, 11:12:59 PM »

Okay, so after making sure the ignition works, getting a new battery, coils and cdi, new carbs from Jay's buddy in Japan, going through the wiring, rebuilding the front forks and brake, changing the oil, buying bodywork, and a bunch of other misc junk, I finally get everything hooked back up, check the oil pressure, open the rebuilt petcock, light the wick, and blammooo...

Nothing. Engine's siezed, obviously from oil starvation caused by the cracked engine case I replaced. When I got the bike, the guy I got it from said that it had been down, but not too bad, just needed the case. I replaced the case, the oil wasn't too low so I wasn't real worried, but now, I'm pissed.

In any case, I'm probably parting out the bike, so any offers for the bike as a whole, or any parts, will be accepted. Actually, I'd love to get rid of it all in one fell swoop, so the first reasonable offer for everything takes it. Just gone over carbs from Jay, good coils, good CDI, fresh forks and master cyinder, spare front wheel, spare junk forks, extra-junky wiring harness, PitterB4's Vance and Hines system, factory exhaust, extra mid-pipe for hi-mount pipe if you want, the list is pretty big. Make me an offer quick, and my anger would probably make me accept it.

Ian

Rocketboy · « **Reply #1 on:** August 22, 2006, 11:34:23 PM »

Sorry, bro, that stinks. If you end up parting it out i could use the headlight. let me know.

interfuse · « **Reply #2 on:** August 22, 2006, 11:38:25 PM »

Sounds like a candidate for Jays big bore 442 kit!! You're 90% finished a sweet racer project. Just do it, mang!

Iyeager · « **Reply #3 on:** August 22, 2006, 11:52:48 PM »

I'd like to not spend one more penny on it if possible.

Ian

interfuse · « **Reply #4 on:** August 23, 2006, 12:19:01 AM »

"it's only money"... you can't race money!

Herr Tod · « **Reply #5 on:** August 23, 2006, 02:17:46 PM »

Quote from: Iyeager

Nothing. Engine's siezed

Did you need to replace the left cover? Because the starter clutch is behind that one, maybe it's only the starter clutch that's broken?

gsxr400 racer · « **Reply #6 on:** August 23, 2006, 06:19:03 PM »

take the cover off and see if it rotates over by hand!!! GOOD LORD!!

Iyeager · « **Reply #7 on:** August 23, 2006, 08:52:30 PM »

Jay, that was the first thing I did when I got the bike, I gave it a good half a turn in each direction, but never made a full revolution in case the guy before me had really messed something up I didn't want to throw anything out of wack. It turns about 3/4 of a revolution but gets hung up somewhere. After pulling the head for a better look-see this A.M. I found the offending piece, it's the piston stuck in the cylinder, and obviously the connecting rod is broken, because that piston doesn't move when the rest of them do.

Ian

gsxr400 racer · « **Reply #8 on:** August 23, 2006, 09:56:27 PM »

I have some parts brother wanna deal!

Iyeager · « **Reply #9 on:** August 23, 2006, 10:28:18 PM »

Sure, I'll sell you what I got for $500, deliver it this weekend, you put your parts in it, then turn around and sell it for $1500.

Deal?

gsxr400 racer · « **Reply #10 on:** August 24, 2006, 12:04:43 AM »

take your oil pan off there would have to be some serious chunks of metal in there!

Herr Tod · « **Reply #11 on:** August 24, 2006, 01:41:56 PM »

Quote from: Iyeager

I gave it a good half a turn in each direction

I hope you had the cam chain tensioned when you did that, because the crankshaft is only supposed to turn to the right, looking at it from the clutch side of the bike.