Author Topic: TWIN head lamps (Read 19027 times)

PitterB4 · « **Reply #60 on:** January 03, 2006, 03:33:56 PM »

There is. I seem to remember Thief saying he had to tap his wheel to use it with his Kat F/E. I could be wrong, tho.

gsxr400 racer · « **Reply #61 on:** January 03, 2006, 03:35:06 PM »

I think thats how it works the holes are there but need tapped !

PitterB4 · « **Reply #62 on:** January 03, 2006, 03:37:58 PM »

So... it's NOT the same wheel!!!

gsxr400 racer · « **Reply #63 on:** January 03, 2006, 03:53:56 PM »

yes damnit smae wheel just they never tapped the hole there is s whole there tho ! i had one but it was like 5 years ago i dont run those poopy wheels!

PitterB4 · « **Reply #64 on:** January 03, 2006, 03:58:44 PM »

Relax or I'll kick you like grandma there in your avatar!

gsxr400 racer · « **Reply #65 on:** January 03, 2006, 04:01:38 PM »

slow yur role there pedro! Or if your LAZY you could go buy a gixxer front wheel! But id just tap the pre made holes my self!

PitterB4 · « **Reply #66 on:** January 03, 2006, 04:29:30 PM »

Herr Tod · « **Reply #67 on:** January 24, 2006, 09:12:15 PM »

Installed my Hornet 600 headlight today. Made it so that both lamps are lit when I switch to high beam, however I use a diode for this at the moment but I'm going to use a relais for it because a diode 'steals' volts and makes the lights dim a little bit. All I can say is... there is light!!!

I'll post some pics tomorrow.

Herr Tod · « **Reply #68 on:** January 25, 2006, 08:00:50 AM »

Here we go, don't look at the blinkers

JmuRiz · « **Reply #69 on:** January 25, 2006, 10:50:55 AM »

Very cool!!

Krautwagen · « **Reply #70 on:** January 30, 2006, 07:40:43 PM »

Looks great.

Did you use the B4 headlight bucket or the entire honda unit? Did the wiring tuck in there nicely or was modding req'd?
What bulbs does that housing take?
How's the light output compared to the stock B4?

THanks
Dave

Herr Tod · « **Reply #71 on:** January 31, 2006, 01:10:18 PM »

I used the complete Hornet headlight. I want to have a chrome bucket again though, might try to mod one or have this (plastic) one chromed. It uses two H11 bulbs (yes that is 11, not 1). The light is much brighter than the stock H4 bulb and I can have both bulbs lit at the same time. The wires are downright terror, I had no problems with them in the original headlight though. I also have some extra wires because of the dual light thing. After a while when the wires get used to their new home it will be a bit easier I think.

It's too bad I crashed my bike the day after this mod, (the headlight is still in one piece) so I have to spend the money I've put aside for xenon lights on repairs

Farre · « **Reply #72 on:** January 31, 2006, 03:57:15 PM »

Nice mod!
damn, your bike crashed and mine just returned from the stealership.

PitterB4 · « **Reply #73 on:** January 31, 2006, 04:13:15 PM »

Sorry, HT. Hope you get her fixed up quick.