Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: CrustyOreo on April 06, 2014, 06:09:11 PM
-
My little 400 has no spark, I pulled a spark lead from each coil and tested it with no results.
I tested for 12V at the coil from the harness side with key on and there's nothing :stickpoke: Should be voltage here? I tried cranking the bike over and still read 0V on the meter.
I checked resistance in the coil on where the bike harness connects and there was continuity
What else can I check?
Thanks
-
Welp disregard this. The wires are broken where they come out of the left side cover for the pulse generator :duh:
Seems it's been repaired before and there isn't enough wire. Anyone stateside have a spare?