Author Topic: Intake cam in the exhaust ! (Read 4917 times)

gsxr400 racer · « **on:** September 20, 2005, 01:40:28 AM »

Put a gixxer intake in the exhaust of my gixxer turnes over fine will find out how it runs this wednesday! will fire it up tuesday!

gsxr400 racer · « **Reply #1 on:** September 21, 2005, 01:38:51 AM »

fired her up and Im

that it made that much of a sound difference , rev's real nice , actually better . So so far i'd give this a big

And say that it is safe for any one with a b4 to put another b4 intake cam in the exhaust ! With no ill effects will run it at the track tomarrow and tell ya how it really reved . But i was exspecting catastrofic failure do to my motor was a bit built and and not measuring anything ! Wich would have put me out of the racing for the rest of the year! But i gave it hell in the garage at 11:00 at night and reved it to about 10,000 rpm and still running so should be good on the track ! Damn i hope it power wheelies!!!!!!!

Jay

banditcilik · « **Reply #2 on:** September 21, 2005, 06:43:44 AM »

Hey, can't wait to hear from you. Hope evrything will be OK.

gsxr400 racer · « **Reply #3 on:** September 22, 2005, 12:18:47 AM »

Holy crap bike is faster , crisper , and now i have to rejet and re gear again as now im hitting the rev limiter every where! That was just what the doctor ordered and now i might be able to win my class this weekend! cheers jay

gsxr400 racer · « **Reply #4 on:** September 22, 2005, 03:25:16 AM »

PitterB4 · « **Reply #5 on:** September 22, 2005, 06:19:49 AM »

How'd you do the timing?

gsxr400 racer · « **Reply #6 on:** September 22, 2005, 10:05:58 AM »

to stock, that little notch on the right side of the cam by cylinder #4 level with the head , count your pins on cam chain . all you have to take out is the exhaust cam so set it up like your checking your valves for cylinder #1 remove all the normal bull shit to get the valve cover off remove your cam chain tensioner the exhaust cam caps and the bolte to the oil tube on the intake cam cap! put the the b4 intake where the exhaust cam was and replace all the stuff you took off , retorque cam caps! LISTEN TO IT PURRRR!

PitterB4 · « **Reply #7 on:** September 22, 2005, 10:14:18 AM »

Hmmm.... might be a good winter project...

If I only knew a source for a B4 intake cam....

Maniac · « **Reply #8 on:** September 22, 2005, 10:33:05 AM »

I have one.

banditcilik · « **Reply #9 on:** September 23, 2005, 06:25:35 AM »

So Gixxer, did you win your class?
PitterB4, are you sure that cam convertion goes d same with B4?

PitterB4 · « **Reply #10 on:** September 23, 2005, 06:34:46 AM »

Quote from: "banditcilik"

So Gixxer, did you win your class?
PitterB4, are you sure that cam convertion goes d same with B4?

Uh, no. I'm a mechanical moron. I do trust Jay when he says:

Quote

And say that it is safe for any one with a b4 to put another b4 intake cam in the exhaust

gsxr400 racer · « **Reply #11 on:** September 23, 2005, 09:17:48 AM »

Quote from: "banditcilik"

So Gixxer, did you win your class?
PitterB4, are you sure that cam convertion goes d same with B4?

the gixxer cams are bigger lift than the bandit ones considering im running a bandit motor in my gixxer frame for the past 3 years i d say its pritty safe , no id say its verey safe! Unless you have milled your head or peeled a layer of the head gasket off ! (to increase your compresion ratio)

And no the race is this weekend , but i should if the rain holds up and my body to!

JmuRiz · « **Reply #12 on:** September 23, 2005, 10:58:21 AM »

Would this work with an old B4 intake cam? Say if you had a GSXR400 intake cam and a stock B4 intake cam on the exhaust?
Just wondering, might be able to get away with just finding a GSXR400 intake cam :-D
Good news BTW, with that big-bore kit your bike will be about 600cc fast!

gsxr400 racer · « **Reply #13 on:** September 23, 2005, 11:27:21 AM »

you can do this with 2 b4 intake cams, you do not need gixxer cams

PitterB4 · « **Reply #14 on:** September 26, 2005, 08:41:43 AM »

So since you were on the podium this weekend, I guess you still think this is the way to go???