Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: banditmack on May 01, 2005, 03:49:40 PM

Title: limiter removal.
Post by: banditmack on May 01, 2005, 03:49:40 PM

My bike a 96 b4 does not go past 100mph.  I understand there may be a limiter involved.  Please can you tell me if it's locatd in the speedo and how to remove it fo :congrats: r full performance.

Title: limiter removal.
Post by: Maniac on May 01, 2005, 04:03:06 PM

It's located in the Digital Igniter box, unfortunatly. The only way to get it out is to have the box modified, do a search in the forum for 'CDI Repair', the place listed there is able to remove it, but it's not cheap.

Title: limiter removal.
Post by: gsxr400 racer on May 02, 2005, 10:23:30 PM

got a green and yellow wire coming out of yuor cdi box? on the small plug? if so follow it and unplug it. see what happens

Title: limiter removal.
Post by: Maniac on May 02, 2005, 11:40:32 PM

I've got the Green and Yellow wire, it runs down towards the pickup... but doesn't plug into anything. Whats it do? (http://www.mazda3forums.com/images2/smilies/dunno.gif)

Title: limiter removal.
Post by: gsxr400 racer on May 02, 2005, 11:45:53 PM

i have one on my harness goes to the cdi i cut mine and it seems to run better from what i was told it goes to a speed limiter. after i cut mine i found a bullet connector that i could have just unpluged if you have this chances are you are restricted  should have 2 wires to small plug on cdi i have 3 but cut one ive talked to others with 3 didnt hurt to cut it i raced like that just last time. with no ill effects. if ya dont like it reconect it.