Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: B4ndit on August 26, 2013, 05:24:29 PM
-
I have been steadily cleaning and correcting problems that I have found on my 93. It has been sitting for 5 years plus the simplicity makes it effortless to turn wrenches. Waiting on my tank and carbs to get finished and I hope to get her fired up and purring.
-
Sounds cool. Any pics ?
-
(https://lh4.googleusercontent.com/-ONlZjyrP624/UgxU6LDc2bI/AAAAAAAACRI/ERKgUzxRhR0/w640-h480-no/photo+%252851%2529.JPG)
(https://lh5.googleusercontent.com/-YcByq0I5wbY/UgxU_s9fjHI/AAAAAAAACRY/y8NsnYe9WZg/w480-h640-no/photo+%252846%2529.JPG)
(https://lh4.googleusercontent.com/-eM8VandsKbE/UgxU8yo5vBI/AAAAAAAACRQ/wSs3p9Z-J4I/w640-h480-no/photo+%252847%2529.JPG)
-
:clap: :thumb:
-
Very nice.
-
:thumb:
In good condition for it year!
You should have seen the state of mine when i first got it!
-
Getting some cleaning and repairs done to the little Bandito
(https://lh3.googleusercontent.com/-pHTbtyR7IqY/UiOqKq42I-I/AAAAAAAACSk/NoYEsnVWTdQ/w640-h480-no/photo+%252853%2529.JPG)
(https://lh5.googleusercontent.com/-NjPoDEPPlpM/UiOqPZlZM8I/AAAAAAAACS0/m2UB3bct1NA/w480-h640-no/photo+%252854%2529.JPG)
(https://lh3.googleusercontent.com/-4JPyCYWxL_c/UiOqSjVyzdI/AAAAAAAACS8/SO4A88eG5rA/w640-h480-no/photo+%252855%2529.JPG)
(https://lh4.googleusercontent.com/-635P8kbiwDg/UiOqVZAQl6I/AAAAAAAACTE/sjMKRK0p9eE/w640-h480-no/photo+%252856%2529.JPG)
-
That's a big garage!...bike lookn goo too!
-
Got my tank back and its going to be just fine. Just need to fit a petcock and I'm waiting on the carbs. Hope to have it running new a few weeks.
(https://lh3.googleusercontent.com/-lbxa4WlG-uY/Uif2UWK3gYI/AAAAAAAACT0/iAfoj0UJv-A/w640-h480-no/photo+%252859%2529.JPG)
(https://lh4.googleusercontent.com/-XxuiRP2ZfcY/Uih5vlOSOCI/AAAAAAAACUc/cE-W7QG6BMQ/w640-h480-no/photo+%252864%2529.JPG)
-
What are you guys using for a fuel tap (petcock)? any alternatives to stock? Its tight right above the carbs where it sits.
-
I am using OEM, But SUDCO has a set up for a GS 500 with and without reserve that should work. You will have to open the hole a little with a dremel for the pingel filter.
-
Think I'll just get a stock one
-
It's ghetto, but I set my petcock on prime and use an inline fuel valve. Valve cost me $2 at a tractor store.
-
IT'S ALIVE....!!! :thumb: after sitting for five years I got it to fire off this morning. Good thing to I have $200 worth of stuff on the way... I'm hoping soon to be... :motorsmile:
-
Update...got my replacement petcock today and installed. New small turn signals fronts mounted I have to wire them up. I had a chance to run it a little while longer today and was able to resolve my tach issues while inside the headlight. :bandit: