Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: Herr Tod on June 28, 2006, 06:41:38 PM

Title: O-ring sizes
Post by: Herr Tod on June 28, 2006, 06:41:38 PM

Once again about the infamous carb O-rings. I have measured these sizes (ID x thickness in mm):

Needle jet (emulsion tube): 10 x 1
Pilot air screw: 3 x 1
Float: 5.5 x 1.5 and 7.5 x 1.5
Membrane cover: 4 x 1

Is this correct?

Title: O-ring sizes
Post by: NintyOne on June 28, 2006, 09:20:36 PM

Emulsion tube: 10mm X 1.5mm
Pilot air screw: didn't know there was an O-ring!
Float: 5mm X 1.5mm & 7mm X 1.5mm
Membrane cover: 3mm X 1.5mm

I hope this helps.

Title: O-ring sizes
Post by: Herr Tod on June 29, 2006, 12:46:28 PM

Thanks! There is an o-ring for the pilot air screw in some 33 mm carbs.

Title: O-ring sizes
Post by: Herr Tod on June 29, 2006, 04:40:00 PM

Just measured again, including the original new rings from Suzuki, and these are my definitive sizes for the 33 mm carbs:

Needle jet (emulsion tube): 10 x 1.5
Pilot air screw: 3 x 1
Float: 5.5 x 1.5 and 7.5 x 1.5
Membrane cover: 4 x 1