Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: Uncle.Jay on October 25, 2009, 10:13:20 AM

Title: offset sprocket
Post by: Uncle.Jay on October 25, 2009, 10:13:20 AM

hi,

I need an offset sprocket for my 400er slingshot bandit for 520 chain. 525 possible, too.

where may I get some?  in germany it´s reaally expensive.

offset needed is 5mm.


greetings jens

Title: Re: offset sprocket
Post by: Chris H on October 25, 2009, 06:41:54 PM

Hi Jens,
Do you need front or rear? i used a front DR350 sproket, these are 520 pitch width and have a lip on one side that can be machined or very carefully ground down with an angle grinder to give a set width. The JE sproket No. is 432 and the total width including the sproket part and the lip is 10mm. For a rear i use the 520 SV650 conversion sprokets made by Talon.

Title: Re: offset sprocket
Post by: Uncle.Jay on October 26, 2009, 03:58:41 PM

thank you chris, i´ll have a look :thumb: