Parting out or selling non running GSF400

[doqq]

LOW BANDWIDTH WARNING!!  MAY TAKE AWHILE TO LOAD PICTURES.


Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr


Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

Untitled by fomz, on Flickr

1993 GSF 400

RED

I laid the bike down about 6 years ago and havent got it running since.  Last time, I had it turning over but it wouldnt idle correctly.  Two cylinders arent firing right.  I know this because when the bike did idle a bit I sprayed water onto the exhaust pipes and two wouldnt show steam.  

So pretty much I am looking to see how many people are interested in parts from the bike or if I can just sell the bike whole, as-is for a reasonable best offer.  

Original carburetors are screwed up.  I have carb from a gsx600 and K&N Ovals on it .  Also has new IRC Roadwinners front and rear.





I will try to get some pictures up ASAP.  

Thank You for looking!

Email me at :  getphong@gmail.com  

SOLD

Kokusan Igniter box
Airbox
Gas Tank
OEM O-Rings
Right Foot Control Bracket/Mount
Original Carburetor set
Front forks
Handlebars
Front rotor
Shifter Linkage and Lever
Ignition coils and plugs
Wiring harness
Clutch perch
Brake perch
starter switch housing
throttle tube
signal switch housing
mirrors
rear master cylinder and reservoir
front and rear seats
seat latch
front sprocket cover
clutch push pin
radiator with fan
tail light
throttle cable
clutch cable
frame
engine

[doqq]

Bike is in Sourthern California if anyone was curious.  Palm Desert, CA to be exact.

[doqq]

Bike is now in local classifieds. 

[doqq]

Still available. 

[doqq]

I do have the seat and the plastic for the rear sub frame.  Also 2 ignitor boxes.  I could take the tires off the wheels if anyone wants it. 

[doqq]

I'm going to be taking this to the metal scrap yard if I get no interest at all.  So get parts while you still can.

[JTOWN03]

doqq, I am interested in the airbox if it is ok, also possible interest in a spare ignitor as well. Can you confirm the part # in the ignitors that you have(think the CA part may be different). Also, what condition is the fuel tank in, would be interested in a straight (rust free!) tank as well.
Thanks, John

[doqq]

Message me your cell phone number and I will send pics.

[doqq]

Airbox is in ok condition with 3 bolts and rubber washers.  Igniter has number 32900-10D00 , BB7217 and reads Kokusan Denki  Made in Japan on the label. 

[doqq]

second igniter is from ebay.  Reads... Pietcard Ignicion Digital (2186 12V) Industria Argentina

[doqq]

Tank is in ok condition, I cant look at the inside right now because I misplaced my keys.  But tank has chips and scratches here and there.

[JTOWN03]

doqq - on the airbox how about $25 + shipping? I am in Michigan (48430). The kokusan ignitor would make a good spare for me- say $85?

[doqq]

$125 shipped for both sounds good?

[doqq]

come on guys, I really want to part as much of this bike out before I send everything to the metal recycling center.

[doqq]

I have some fairly new ACCEL Super Coil with model number 140404 with plug wires.  Make me an offer on these.


Accel Coils by fomz, on Flickr