Author Topic: Race weekend in North Bay  (Read 3143 times)

Offline Garyola

  • Board Homesteader!
  • ***
  • Posts: 250
    • http://www.mulcahey.com
Race weekend in North Bay
« on: September 10, 2007, 03:26:30 PM »
Well I was up in North Bay, Ontario racing in the VRRA series this past weekend. The track is not a permanent one, it is put together every year for this event in September at the airport.
This was my 1st time racing here and the track is very rough and bumpy with many surface changes, lots of cracks with tar sealer on them and does not heat up in the slightest in September. But it's the same for every one and it's a challenge to race there.
In the qualifying heat race on Saturday I got a good start with the little B4. I was using a 13/49 gearing and it just jumped off the line and after the 1st corner I was actually leading the race(1st time ever). By the end of the lap I was in second and then the better racers took over. By the 3rd lap I was a solid 5th and would not have been caught at the pace I was going. At the end of the 3rd lap I low sided and that was the end of my race. Only broke the clutch lever, got a good grind on the clip-on and a scratch on the frame.
I was then 24th on the grid for the final on Sunday because of my DNF. Dead last. Oh well. So I just went out to do what I could at that point. I got a good start but didn't really push too hard. I was about 3 seconds a lap slower than my times from the day before and finished 11th. The B4 is running like a real trooper. She is quick and agile and if it ever gets a decent racer on it, the B4 could get on the podium.

Getting grided up.


On the track.



This is me starting to go down. I was just going too fast, leaned over too far for the surface and the line I was taking. Live and learn.



Down



G

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Race weekend in North Bay
« Reply #1 on: September 10, 2007, 04:50:34 PM »
you seem tall enough to drive your knee into the ground and save it mate,  :stickpoke: tough little bike.
cheers
Jay
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
Race weekend in North Bay
« Reply #2 on: September 10, 2007, 11:06:57 PM »
Looks like a blast. I'm glad neither you or your B4 got hurt.
Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline PitterB4

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 3698
Race weekend in North Bay
« Reply #3 on: September 11, 2007, 02:04:44 AM »
Looks and sounds like fun, G.  I may need to try my hand at racing one of these days.  

BTW, Jay is right.  I've saved a couple lowsides by pushing her back up with the knee.  I almost screwed up this weekend.  I got lazy and tried to maintain my normal pace without moving my body enough.  I actually scrapped a peg, exhaust and boot (toe and shin sliders)... with rearsets on the CBR.  That woke me up!
Rob
Bikeless!
'93 Bandit 400 - SOLD
'98 Honda F3 Track Bike - SOLD
'98 Kawi ZX-6R Street Bike - SOLD
NESBA #87 - RETIRED
'00 Gary Fisher Kaitai
'09 Bianchi Via Nirone 7

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Race weekend in North Bay
« Reply #4 on: September 11, 2007, 08:24:57 AM »
Quote from: "PitterB4"
Looks and sounds like fun, G.  I may need to try my hand at racing one of these days.  



Dam scrapping vintage racing going on a f3 mate v6 in wera
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline Garyola

  • Board Homesteader!
  • ***
  • Posts: 250
    • http://www.mulcahey.com
Race weekend in North Bay
« Reply #5 on: September 11, 2007, 09:25:05 AM »
I know what you mean about the saving with the knee and all. If it was a normal track surface I think I would have had a bit of a longer slide because there would have been traction. This surface was just very unforgiving. You had traction or you didn't. At that second, I didn't. :thud:

But I had a lot of fun. I think that is the end of my season and I can start preparing for the 2008 madness. :stir:


G

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Race weekend in North Bay
« Reply #6 on: September 11, 2007, 11:24:06 AM »
gary i have some extra loot im going to send your rims saturday
cheers
Jay
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline Garyola

  • Board Homesteader!
  • ***
  • Posts: 250
    • http://www.mulcahey.com
Race weekend in North Bay
« Reply #7 on: September 11, 2007, 01:17:01 PM »
:thanks:

I sent you an email about it.


G

Offline BANDIT#999

  • Board Homesteader!
  • ***
  • Posts: 134
Race weekend in North Bay
« Reply #8 on: September 14, 2007, 10:54:19 PM »
Hey Gary, Bandit here from P2 P3 at North Bay, how's it going?
Below are the links to my vids from P2 and P3, I probably know you to see you but right now I'm drawing a blank. (Vintage racer) I'm #999 on a 350 Honda, I was pitted right in front of registration.
Here's the links...
P2
http://www.youtube.com/watch?v=ypj6HSSK3xo
http://www.youtube.com/watch?v=tr8IaB52YSg
http://www.youtube.com/watch?v=BECvzGlTj1g
http://www.youtube.com/watch?v=UVOHAOn-WDY

P3
http://www.youtube.com/watch?v=SiJpEDmBewY
http://www.youtube.com/watch?v=knI0S9bS0cc
http://www.youtube.com/watch?v=Ma9Gu1Y_FTc
If tomorrow really is the first day of the rest of my life..........does that mean all the shit I do today don't count?

Offline PitterB4

  • Administrator
  • Board Homesteader!
  • *****
  • Posts: 3698
Race weekend in North Bay
« Reply #9 on: September 15, 2007, 12:31:48 AM »
Quote from: "BANDIT#999"
Hey Gary, Bandit here from P2 P3 at North Bay, how's it going?...


HEY!  Isn't there some law requiring you to say, "How's it going, eh?
Rob
Bikeless!
'93 Bandit 400 - SOLD
'98 Honda F3 Track Bike - SOLD
'98 Kawi ZX-6R Street Bike - SOLD
NESBA #87 - RETIRED
'00 Gary Fisher Kaitai
'09 Bianchi Via Nirone 7

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Race weekend in North Bay
« Reply #10 on: September 15, 2007, 12:33:40 AM »
:shock:  :lol:  :toofunny:  :danger:  :no-no:
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol

Offline Garyola

  • Board Homesteader!
  • ***
  • Posts: 250
    • http://www.mulcahey.com
Race weekend in North Bay
« Reply #11 on: September 15, 2007, 11:26:52 AM »
Bandit,
I know who you are. I'm Gary the photographer. You always call me by my name so you know who I am . . . . eh.
Good videos . . . . .eh.  What camera are you using?

Here are a couple from my buddy Tim from the camera on his bike.

1st lap . . . . eh.
http://youtube.com/watch?v=mt2HXU3X_pE

Me crashing at the end of the 3rd lap. . . . eh. I'm 2 back and hard to see so you have to watch for the guy skidding across the track at about the 1:08 mark . . . . eh.

http://youtube.com/watch?v=2GaRYk3Dv7o


G . . . eh.

Offline interfuse

  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 1336
Race weekend in North Bay
« Reply #12 on: September 15, 2007, 05:42:53 PM »
That's a rough track alright.
Mike

'91 GSF400
It's more fun to ride a slow bike fast than a fast bike slow.

Offline gsxr400 racer

  • I find things for a small fee....
  • Site Supporters
  • Board Homesteader!
  • ***
  • Posts: 3344
    • For all your disc golf needs...maybe i can race again someday.lol
Re: Race weekend in North Bay
« Reply #13 on: September 15, 2007, 11:31:35 PM »
Quote from: "Garyola"
On the track.



G


Our life flight is a bit more advanced brother, good thing you did not need it.
 :stickpoke:  :motorsmile:
1988 gsxr 400 sp (sprint bike)
*  SELLER OF THE 442CC BIG BORE PISTON KIT FOR THE BANDIT 400,GSXR400, GK73 and 76.* And carb kits(orings)too. Email me from here.
has been a wera expert #610 lol