Bandit Alley
MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: Banditmax on November 16, 2007, 02:34:01 PM
-
Can anyone get me the dimensions of the rad grill from a 1st gen b4 like the distance between mounting holes and length and width. Thankss
-
Please someone :grin:
-
I'm sure Red01 will be here any moment to answer your question. He's probubly tied up at the moment jumping buildings with a single bound, but he'll know the answer.
-
For the mounting holes: 362mm horizontal between centres, 120mm vertical.
For the grill (to the outside edge of the edge bit, not the mesh): 315mm wide by 199mm high
Screws are M4.
:grin:
That's from a 1993 bandit 400, I guess that's 1st gen?
(http://i38.photobucket.com/albums/e118/edorp/bandit%20cooling%20system/IMG_1018e.jpg)
-
Thankyou eric thats perfect. I just bought a stainless rad grill and the guy had two of different sizes and im not with the bike at the moment so just needed a check. Thankyou
-
lol i use some small fencing on my rad
-
There is something pleasing about being able to create your own solution.
lol i use some small fencing on my rad
-
:toofunny:
I'm sure Red01 will be here any moment to answer your question. He's probubly tied up at the moment jumping buildings with a single bound, but he'll know the answer.
I'll have to defer to gsxr400 racer and other 400/250 gurus for stuff like this... I've got zero, zip, nada, experience with the original Bandits. :crackattack: