Author Topic: carb size (Read 3174 times)

shihhan · « **on:** May 29, 2005, 07:57:34 AM »

g'day
Can someone tell me what size carbs are on my 89 mod bandit 250?.Also i want to know in which order do the plastic washer and spacer go on the air/mixture needle cause i'm still havin problems which my carbs....Ohhh and 1 more thing

does anyone know where to get some plug leads for the 250? whether it be all 4 or by the metre,i'm in australia........ thanks guys
Darren

echomadman · « **Reply #1 on:** May 30, 2005, 08:19:54 AM »

I just bought a length of plug lead and cut my own leads, cost a few euros for 4 feet of it

as for the carbs there's some info on the needles here.
http://216.239.39.104/translate_c?hl=en&ie=UTF-8&oe=UTF-8&langpair=ja%7Cen&u=http://www1.synapse.ne.jp/s-hara/bandit/cab-pist.html&prev=/language_tools

hope this helps

edit:
found some more carb specs, again translated by google
carburetor
type: 1C$1d0 (the after the P: 1C$1d1
gas valve diameter: 30mm
venturi diameter: Variable (largest list 23mm)
air valve type: Manually operated * butterfly system

gsxr400 racer · « **Reply #2 on:** July 16, 2005, 11:21:32 PM »

Just a freak question does the b4 carbs fit on the 250 as a carb upgrade ? anyone tried it?

echomadman · « **Reply #3 on:** July 18, 2005, 06:40:35 AM »

i've been thinking about it, but i cant find anyone with a set of 400 carbs i can try it with, and i'm not chancing buying some if they're going to be useless to me.