Bandit Alley

MODEL SPECIFIC => SUZUKI BANDIT 250 & 400 => Topic started by: sabandit on September 27, 2005, 09:07:06 AM

Title: Rear wheel not spinning freely in neutral !
Post by: sabandit on September 27, 2005, 09:07:06 AM

Hi All

After replacing my sprockets/chain and having taken my B4 for a run (140km) I seem to have some sorta problem.

What seems to be happening now is that when the bike is in gear (on centre stand) and I hold the clutch in and try and spin the rear wheel it does not spin at all.  When I rode the bike again and rolled it neutral(in gear with clutch in) it rolled ,but not smoothly.

Hope I explained the problem well enough...Any views ?? :duh:


TKs

Title: Rear wheel not spinning freely in neutral !
Post by: MaccDaddy on September 27, 2005, 09:59:56 AM

check the tention on the chain i've had this happen befor and found that after the ride the chain was tighter due to me not tightening the nut properly. remember to have 25mm slack on chain and keep it straight (the sprockets that is). :beers:

Title: Rear wheel not spinning freely in neutral !
Post by: sabandit on September 27, 2005, 12:44:30 PM

Tks for the quick feedback MaccDaddy. :thanks:

Will give it a bash soon and let you know the result

 :grin:

Sabandit